Dormer 0121979 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 61/64 in Drill - Fraction, 0.9531 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5969699 0121979 0234

Dormer 0121986 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 63/64 in Drill - Fraction, 0.9844 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5969741 0121986 0234

Dormer 0172728 A170 General Purpose Jobber Length Type N Dormer Reduced Parallel Shank Drill, 1-1/32 in Drill - Fraction, 1.0312 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5969721 0172728 0234

Dormer 0172735 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 1-1/16 in Drill - Fraction, 1.0625 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5969714 0172735 0234

Dormer 0172759 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 1-1/8 in Drill - Fraction, 1.125 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5969733 0172759 0234

Dormer 0172766 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 1-5/32 in Drill - Fraction, 1.1562 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5969794 0172766 0234

Dormer 0172773 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 1-3/16 in Drill - Fraction, 1.1875 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5969769 0172773 0234

Dormer 0172780 A170 General Purpose Jobber Length Type N Dormer Reduced Parallel Shank Drill, 1-7/32 in Drill - Fraction, 1.2188 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5969818 0172780 0234

Dormer 0172797 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 1-1/4 in Drill - Fraction, 1.25 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5969725 0172797 0234

Dormer 0172803 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 1-5/16 in Drill - Fraction, 1.3125 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5969789 0172803 0234

Dormer 0030578 A190 Jobber Length Drill Set, Metric, 1 mm Min Drill Bit, 13 mm Max Drill Bit, 118 deg Drill Point Angle, 25 Pieces, HSS, Steam Oxide

DORM 5969738 0030578 0913

Dormer 0179413 A190 Jobber Length Drill Set, Imperial, 1/16 in Min Drill Bit, 3/8 in Max Drill Bit, 118 deg Drill Point Angle, 21 Pieces, HSS, Steam Oxide

DORM 5969754 0179413 0903

Dormer 0179499 A191 Jobber Length Drill Set, Imperial, #80 Min Drill Bit, #61 Max Drill Bit, 118 deg Drill Point Angle, 20 Pieces, HSS, Steam Oxide

DORM 5969782 0179499 0904

Dormer 0030691 A200 Center Drill Single End Combined Drill and Countersink, 0.8 mm Drill - Metric, 0.0315 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969822 0030691 0243

Dormer 0030707 A200 Center Drill Double End Combined Drill and Countersink, 1 mm Drill - Metric, 0.0394 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969827 0030707 0243

Dormer 0030714 A200 Center Drill Double End Combined Drill and Countersink, 1.25 mm Drill - Metric, 0.0492 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969831 0030714 0243

Dormer 0030721 A200 Center Drill Double End Combined Drill and Countersink, 1.6 mm Drill - Metric, 0.063 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969836 0030721 0243

Dormer 0030738 A200 Center Drill Double End Combined Drill and Countersink, 10 mm Drill - Metric, 0.3937 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969841 0030738 0243

Dormer 0030745 A200 Center Drill Double End Combined Drill and Countersink, 2 mm Drill - Metric, 0.0787 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969854 0030745 0243

Dormer 0239230 A217 Center Drill Double End Combined Drill and Countersink, 0.1094 in Drill - Decimal Inch, 82 deg Included Angle, 120 deg Point Angle, HSS, Bright

DORM 5969415 0239230 0244

Dormer 0239247 A217 Center Drill Double End Combined Drill and Countersink, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 82 deg Included Angle, 120 deg Point Angle, HSS, Bright

DORM 5969418 0239247 0244

Dormer 0239254 A217 Center Drill Double End Combined Drill and Countersink, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 82 deg Included Angle, 120 deg Point Angle, HSS, Bright

DORM 5969420 0239254 0244

Dormer 0239261 A217 Center Drill Double End Combined Drill and Countersink, 0.2188 in Drill - Decimal Inch, 82 deg Included Angle, 120 deg Point Angle, HSS, Bright

DORM 5969422 0239261 0244

Dormer 0121870 A170 General Purpose Jobber Length Type N Dormer Reduced Parallel Shank Drill, 33/64 in Drill - Fraction, 0.5156 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5968798 0121870 0234

Dormer 0121887 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 35/64 in Drill - Fraction, 0.5469 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5968804 0121887 0234

Dormer 0121894 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 37/64 in Drill - Fraction, 0.5781 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5968809 0121894 0234

Dormer 0121900 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 39/64 in Drill - Fraction, 0.6094 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5968814 0121900 0234

Dormer 0121917 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 43/64 in Drill - Fraction, 0.6719 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5968828 0121917 0234

Dormer 0121924 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 47/64 in Drill - Fraction, 0.7344 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5968838 0121924 0234

Dormer 0121931 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 49/64 in Drill - Fraction, 0.7656 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5968842 0121931 0234

Dormer 0121948 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 53/64 in Drill - Fraction, 0.8281 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5968858 0121948 0234

Dormer 0121955 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 55/64 in Drill - Fraction, 0.8594 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5968862 0121955 0234

Dormer 0121962 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 59/64 in Drill - Fraction, 0.9219 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5968878 0121962 0234

Dormer 0172810 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 1-3/8 in Drill - Fraction, 1.375 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5969784 0172810 0234

Dormer 0172827 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 1-7/16 in Drill - Fraction, 1.4375 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5969809 0172827 0234

Dormer 0172834 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5969718 0172834 0234

Dormer 0238288 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 1-7/64 in Drill - Fraction, 1.2656 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5968685 0238288 0234

Dormer 0238301 A170 General Purpose Jobber Length Type N Reduced Parallel Shank Drill, 1-9/64 in Drill - Fraction, 1.1406 in Drill - Decimal Inch, 1/2 in Shank, HSS

DORM 5968761 0238301 0234

Dormer 0226148 A176 Type B Medium Duty Jobber Length Drill, Imperial, 13/64 in Drill - Fraction, 0.2031 in Drill - Decimal Inch, HSS, Steam Tempered

DORM 5969900 0226148 0170

Dormer 0030547 A190 Jobber Length Drill Set, Metric, 1 mm Min Drill Bit, 10 mm Max Drill Bit, 118 deg Drill Point Angle, 19 Pieces, HSS, Steam Oxide

DORM 5969724 0030547 0913

Dormer 0030554 A190 Jobber Length Drill Set, Metric, 1 mm Min Drill Bit, 6 mm Max Drill Bit, 118 deg Drill Point Angle, 51 Pieces, HSS, Steam Oxide

DORM 5969728 0030554 0913

Dormer 0030561 A190 Jobber Length Drill Set, Metric, 6 mm Min Drill Bit, 10 mm Max Drill Bit, 118 deg Drill Point Angle, 41 Pieces, HSS, Steam Oxide

DORM 5969732 0030561 0913

Dormer 0030752 A200 Center Drill Double End Combined Drill and Countersink, 2.5 mm Drill - Metric, 0.0984 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969858 0030752 0243

Dormer 0030769 A200 Center Drill Double End Combined Drill and Countersink, 3.15 mm Drill - Metric, 0.124 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969862 0030769 0243

Dormer 0030776 A200 Center Drill Double End Combined Drill and Countersink, 4 mm Drill - Metric, 0.1575 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969866 0030776 0243

Dormer 0030783 A200 Center Drill Double End Combined Drill and Countersink, 5 mm Drill - Metric, 0.1969 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969870 0030783 0243

Dormer 0030790 A200 Center Drill Double End Combined Drill and Countersink, 6.3 mm Drill - Metric, 0.248 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969873 0030790 0243

Dormer 0030806 A200 Center Drill Double End Combined Drill and Countersink, 8 mm Drill - Metric, 0.315 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969877 0030806 0243

Dormer 0239216 A217 Center Drill Double End Combined Drill and Countersink, 0.0469 in Drill - Decimal Inch, 82 deg Included Angle, 120 deg Point Angle, HSS, Bright

DORM 5969408 0239216 0244

Dormer 0239223 A217 Center Drill Double End Combined Drill and Countersink, 0.0781 in Drill - Decimal Inch, 82 deg Included Angle, 120 deg Point Angle, HSS, Bright

DORM 5969412 0239223 0244