SGS 57011 301 Double End General Purpose Combined Drill and Countersink, #5 Drill - Wire, 0.2055 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57011 301

SGS 57012 301 Double End General Purpose Combined Drill and Countersink, #6 Drill - Wire, 0.204 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57012 301

SGS 57075 301 Double End Combined Drill and Countersink Set, #00 Min Trade Size, #6 Max Trade Size, 118 deg Included, 16 Pieces, Micrograin Solid Carbide, Bright

SGS 57075 301

SGS 57076 101 General Purpose Jobber Length Drill, Imperial, #80 Drill - Wire, 0.0135 in Drill - Decimal Inch, Micro Grain Solid Carbide, AlTiN Coated

SGS 57076 101

SGS 57077 101 General Purpose Jobber Length Drill, Imperial, #79 Drill - Wire, 0.0145 in Drill - Decimal Inch, Micro Grain Solid Carbide, AlTiN Coated

SGS 57077 101

SGS 57078 101 General Purpose Jobber Length Drill, Imperial, 1/64 in Drill - Fraction, 0.0156 in Drill - Decimal Inch, Micro Grain Solid Carbide, AlTiN Coated

SGS 57078 101

SGS 57079 101 General Purpose Jobber Length Drill, Imperial, #78 Drill - Wire, 0.016 in Drill - Decimal Inch, Micro Grain Solid Carbide, AlTiN Coated

SGS 57079 101

SGS 57080 101 General Purpose Jobber Length Drill, Imperial, #77 Drill - Wire, 0.018 in Drill - Decimal Inch, Micro Grain Solid Carbide, AlTiN Coated

SGS 57080 101

SGS 57081 101 General Purpose Jobber Length Drill, Imperial, #76 Drill - Wire, 0.02 in Drill - Decimal Inch, Micro Grain Solid Carbide, AlTiN Coated

SGS 57081 101

SGS 57082 101 General Purpose Jobber Length Drill, Imperial, #75 Drill - Wire, 0.021 in Drill - Decimal Inch, Micro Grain Solid Carbide, AlTiN Coated

SGS 57082 101

KYOCERA 56268 106 General Purpose Straight Flute Drill, Imperial, #59 Drill - Wire, 0.041 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Micrograin Solid Carbide

SGS 56268 106

SGS 56269 106 General Purpose Straight Flute Drill, Imperial, #60 Drill - Wire, 0.04 in Drill - Decimal Inch, 3XD D Cutting, 2 Flutes, Micrograin Solid Carbide

SGS 56269 106

SGS 57005 301 Double End General Purpose Combined Drill and Countersink, #00 Drill - Wire, 0.025 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57005 301

SGS 57006 301 Double End General Purpose Combined Drill and Countersink, #0 Drill - Wire, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57006 301

SGS 57007 301 Double End General Purpose Combined Drill and Countersink, #1 Drill - Wire, 0.228 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57007 301

SGS 57008 301 Double End General Purpose Combined Drill and Countersink, #2 Drill - Wire, 0.221 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57008 301

SGS 57009 301 Double End General Purpose Combined Drill and Countersink, #3 Drill - Wire, 0.213 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57009 301

SGS 57010 301 Double End General Purpose Combined Drill and Countersink, #4 Drill - Wire, 0.209 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57010 301

SGS 57083 101 General Purpose Jobber Length Drill, Imperial, #74 Drill - Wire, 0.0225 in Drill - Decimal Inch, Micro Grain Solid Carbide, AlTiN Coated

SGS 57083 101

SGS 57084 101 General Purpose Jobber Length Drill, Imperial, #73 Drill - Wire, 0.024 in Drill - Decimal Inch, Micro Grain Solid Carbide, AlTiN Coated

SGS 57084 101

SGS 57085 101 General Purpose Jobber Length Drill, Imperial, #72 Drill - Wire, 0.025 in Drill - Decimal Inch, Micro Grain Solid Carbide, AlTiN Coated

SGS 57085 101

SGS 57086 101 General Purpose SGS Jobber Length Drill, Imperial, #71 Drill - Wire, 0.026 in Drill - Decimal Inch, Micro Grain Solid Carbide, AlTiN Coated

SGS 57086 101

SGS 57087 101 General Purpose Jobber Length Drill, Imperial, #70 Drill - Wire, 0.028 in Drill - Decimal Inch, Micro Grain Solid Carbide, AlTiN Coated

SGS 57087 101

SGS 57088 101 General Purpose Jobber Length Drill, Imperial, #69 Drill - Wire, 0.0292 in Drill - Decimal Inch, Micro Grain Solid Carbide, AlTiN Coated

SGS 57088 101

SGS 57089 101 General Purpose SGS Jobber Length Drill, Imperial, #68 Drill - Wire, 0.031 in Drill - Decimal Inch, Micro Grain Solid Carbide, AlTiN Coated

SGS 57089 101