SGS 32574 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 5 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 32574 55CR

SGS 32575 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 32575 55CR

SGS 32576 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 32576 55CR

SGS 32577 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 32577 55CR

SGS 32578 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 32578 55CR

SGS 32579 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 32579 55CR

SGS 32580 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 32580 55CR

SGS 32581 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 32581 55CR

SGS 32582 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 32582 55CR

SGS 32583 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 32583 55CR

SGS 32585 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/4 in Dia Cutter, 0.06 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 32585 55CR

SGS 32586 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 3/4 in Dia Cutter, 0.06 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 32586 55CR

SGS 32587 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1 in Dia Cutter, 0.03 in Corner Radius, 1-1/2 in Length of Cut, 5 Flutes, 1 in Dia Shank, 4 in OAL

SGS 32587 55CR

SGS 32588 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1 in Dia Cutter, 0.03 in Corner Radius, 1-1/2 in Length of Cut, 5 Flutes, 1 in Dia Shank, 4 in OAL

SGS 32588 55CR

SGS 32589 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1 in Dia Cutter, 0.06 in Corner Radius, 1-1/2 in Length of Cut, 5 Flutes, 1 in Dia Shank, 4 in OAL

SGS 32589 55CR

SGS 32590 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1 in Dia Cutter, 0.06 in Corner Radius, 1-1/2 in Length of Cut, 5 Flutes, 1 in Dia Shank, 4 in OAL

SGS 32590 55CR

SGS 32591 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1/2 in Length of Cut, 5 Flutes, 3/8 in Dia Shank, 2 in OAL

SGS 32591 55CS

SGS 32592 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 1/2 in Length of Cut, 5 Flutes, 3/8 in Dia Shank, 2 in OAL

SGS 32592 55CS

SGS 32593 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 1/2 in Length of Cut, 5 Flutes, 3/8 in Dia Shank, 2 in OAL

SGS 32593 55CS

SGS 32594 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 5/8 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL

SGS 32594 55CS

SGS 32595 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 5/8 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL

SGS 32595 55CS

SGS 32596 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 5/8 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL

SGS 32596 55CS

SGS 32597 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 5/8 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL

SGS 32597 55CS

SGS 32598 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3 in OAL

SGS 32598 55CS

SGS 32599 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3 in OAL

SGS 32599 55CS

SGS 32600 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3 in OAL

SGS 32600 55CS

SGS 32601 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3 in OAL

SGS 32601 55CS

SGS 32602 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 3 in OAL

SGS 32602 55CS

SGS 32603 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 3 in OAL

SGS 32603 55CS

SGS 32604 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/4 in Dia Cutter, 0.06 in Corner Radius, 1 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 3 in OAL

SGS 32604 55CS

SGS 32605 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 3/4 in Dia Cutter, 0.06 in Corner Radius, 1 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 3 in OAL

SGS 32605 55CS

SGS 32608 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/32 in Dia Cutter, 0.01 in Corner Radius, 5/16 in Length of Cut, 5 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 32608 55CS

SGS 32609 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/32 in Dia Cutter, 0.01 in Corner Radius, 9/16 in Length of Cut, 5 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 32609 55CR

SGS 32610 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/16 in Dia Cutter, 0.01 in Corner Radius, 5/16 in Length of Cut, 5 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 32610 55CS

SGS 32612 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 7/32 in Dia Cutter, 0.015 in Corner Radius, 3/8 in Length of Cut, 5 Flutes, 1/4 in Dia Shank, 2 in OAL

SGS 32612 55CS

SGS 32613 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 7/32 in Dia Cutter, 0.015 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 32613 55CR

SGS 32616 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/4 in Dia Cutter, 0.015 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 1/4 in Dia Shank, 4 in OAL

SGS 32616 55CL

SGS 32619 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/16 in Dia Cutter, 0.015 in Corner Radius, 7/16 in Length of Cut, 5 Flutes, 5/16 in Dia Shank, 2 in OAL

SGS 32619 55CS

SGS 32620 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/16 in Dia Cutter, 0.015 in Corner Radius, 13/16 in Length of Cut, 5 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 32620 55CR

SGS 32621 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/16 in Dia Cutter, 0.015 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 5/16 in Dia Shank, 4 in OAL

SGS 32621 55CL

SGS 32632 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 7/16 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 5 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL

SGS 32632 55CR

SGS 32655 V-Carb 55 55S Fractional High Performance Square End End Mill, 1/8 in, 1/2 in Length of Cut, 5 Flutes, 1/8 in Shank, 1-1/2 in OAL

SGS 32655 55S

SGS 32656 V-Carb 55 55S Fractional High Performance Square End End Mill, 5/32 in, 9/16 in Length of Cut, 5 Flutes, 3/16 in Shank, 2 in OAL

SGS 32656 55S

SGS 32658 V-Carb 55 55S Fractional High Performance Square End End Mill, 7/32 in, 3/4 in Length of Cut, 5 Flutes, 1/4 in Shank, 2-1/2 in OAL

SGS 32658 55S

SGS 32663 V-Carb 55 55S Fractional High Performance Square End End Mill, 7/16 in, 1 in Length of Cut, 5 Flutes, 7/16 in Shank, 2-3/4 in OAL

SGS 32663 55S

SGS 32666 V-Carb 55 55S Fractional High Performance Square End End Mill, 5/8 in, 1-5/8 in Length of Cut, 5 Flutes, 5/8 in Shank, 3-1/2 in OAL

SGS 32666 55S

SGS 32668 V-Carb 55 55S Fractional High Performance Square End End Mill, 3/4 in, 1-5/8 in Length of Cut, 5 Flutes, 3/4 in Shank, 4 in OAL

SGS 32668 55S

SGS 32669 V-Carb 55 Medium Length Square End Variable Geometry High Performance End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 32669 55S

SGS 32670 V-Carb 55 55S Fractional High Performance Square End End Mill, 1 in, 1-1/2 in Length of Cut, 5 Flutes, 1 in Shank, 4 in OAL

SGS 32670 55S

SGS 32671 V-Carb 55 Medium Length Square End Variable Geometry High Performance End Mill, 1 in Dia Cutter, 1-1/2 in Length of Cut, 5 Flutes, 1 in Dia Shank, 4 in OAL

SGS 32671 55S