SGS 32609 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/32 in Dia Cutter, 0.01 in Corner Radius, 9/16 in Length of Cut, 5 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 32609 55CR

SGS 32610 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/16 in Dia Cutter, 0.01 in Corner Radius, 5/16 in Length of Cut, 5 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 32610 55CS

SGS 32611 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/16 in Dia Cutter, 0.01 in Corner Radius, 5/8 in Length of Cut, 5 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 32611 SER55CR

SGS 32612 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 7/32 in Dia Cutter, 0.015 in Corner Radius, 3/8 in Length of Cut, 5 Flutes, 1/4 in Dia Shank, 2 in OAL

SGS 32612 55CS

SGS 32613 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 7/32 in Dia Cutter, 0.015 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 32613 55CR

SGS 32614 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/4 in Dia Cutter, 0.015 in Corner Radius, 3/8 in Length of Cut, 5 Flutes, 1/4 in Dia Shank, 2 in OAL

SGS 32614

SGS 32615 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/4 in Dia Cutter, 0.015 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 32615

SGS 32616 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/4 in Dia Cutter, 0.015 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 1/4 in Dia Shank, 4 in OAL

SGS 32616 55CL

SGS 32619 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/16 in Dia Cutter, 0.015 in Corner Radius, 7/16 in Length of Cut, 5 Flutes, 5/16 in Dia Shank, 2 in OAL

SGS 32619 55CS

SGS 32620 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/16 in Dia Cutter, 0.015 in Corner Radius, 13/16 in Length of Cut, 5 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 32620 55CR

SGS 32621 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/16 in Dia Cutter, 0.015 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 5/16 in Dia Shank, 4 in OAL

SGS 32621 55CL

SGS 32625 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1/2 in Length of Cut, 5 Flutes, 3/8 in Dia Shank, 2 in OAL

SGS 32625 55CR

SGS 32626 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 5 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 32626

SGS 32627 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1-1/2 in Length of Cut, 5 Flutes, 3/8 in Dia Shank, 4 in OAL

SGS 32627 SERIES 55CR

SGS 32628 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 5 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 32628

SGS 32632 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 7/16 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 5 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL

SGS 32632 55CR

SGS 32633 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 7/16 in Dia Cutter, 0.015 in Corner Radius, 2 in Length of Cut, 5 Flutes, 7/16 in Dia Shank, 4 in OAL

SGS 32633 55CL

SGS 32655 V-Carb 55 55S Fractional High Performance Square End End Mill, 1/8 in, 1/2 in Length of Cut, 5 Flutes, 1/8 in Shank, 1-1/2 in OAL

SGS 32655 55S

SGS 32656 V-Carb 55 55S Fractional High Performance Square End End Mill, 5/32 in, 9/16 in Length of Cut, 5 Flutes, 3/16 in Shank, 2 in OAL

SGS 32656 55S

SGS 32657 V-Carb 55 55S Fractional High Performance Square End End Mill, 3/16 in, 5/8 in Length of Cut, 5 Flutes, 3/16 in Shank, 2 in OAL

SGS 32657

SGS 32658 V-Carb 55 55S Fractional High Performance Square End End Mill, 7/32 in, 3/4 in Length of Cut, 5 Flutes, 1/4 in Shank, 2-1/2 in OAL

SGS 32658 55S

SGS 32659 V-Carb 55 55S Fractional High Performance Square End End Mill, 1/4 in, 3/4 in Length of Cut, 5 Flutes, 1/4 in Shank, 2-1/2 in OAL

SGS 32659

SGS 32660 V-Carb 55 55S Fractional High Performance Square End End Mill, 5/16 in, 13/16 in Length of Cut, 5 Flutes, 5/16 in Shank, 2-1/2 in OAL

SGS 32660 SER55

SGS 32661 V-Carb 55 55S Fractional High Performance Square End End Mill, 3/8 in, 1 in Length of Cut, 5 Flutes, 3/8 in Shank, 2-1/2 in OAL

SGS 32661 SERIES 55

SGS 32662 V-Carb 55 Medium Length Square End Variable Geometry High Performance End Mill, 3/8 in Dia Cutter, 1 in Length of Cut, 5 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 32662 SERIES 55