SGS 38161 1CR Center Cutting Positive Rake Regular Length Single End Mill, 3/16 in Dia Cutter, 0.03 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 38161 01C

SGS 38162 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.015 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38162 01C

SGS 38163 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.02 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38163 01C

SGS 38164 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38164 01C

SGS 38165 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.045 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38165 01C

SGS 38166 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.015 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38166 01C

SGS 38167 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.02 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38167 01C

SGS 38168 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.03 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38168 01C

SGS 38169 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.045 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38169 01C

SGS 38170 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38170 01C

SGS 38171 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38171 01C

SGS 38172 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38172 01C

SGS 38173 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.045 in Corner Radius, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38173 01C

SGS 38174 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38174 01C

SGS 38175 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.02 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38175 01C

SGS 38176 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38176 01C

SGS 38177 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.045 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38177 01C

SGS 38178 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38178 01C

SGS 38179 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.015 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38179 01C

SGS 38180 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.02 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38180 01C

SGS 38181 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38181 01C

SGS 38182 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.045 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38182 01C

SGS 38183 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38183 01C

SGS 38184 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.09 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38184 01C

SGS 38185 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.015 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38185 01C