Niagara Cutter N68961 VFP635 Center Cutting High Performance Medium Length Single End End Mill, 1-1/4 in Dia Cutter, 0.04 in Corner Radius, 3 in Length of Cut, 6 Flutes, 1-1/4 in Dia Shank, 5-1/2 in OAL

NIAG N68961

Niagara Cutter N68963 VFP635 Center Cutting High Performance Long Length Single End End Mill, 1-1/4 in Dia Cutter, 0.04 in Corner Radius, 4 in Length of Cut, 6 Flutes, 1-1/4 in Dia Shank, 6-1/2 in OAL

NIAG N68963

Niagara Cutter N68967 VFP635 Center Cutting High Performance Medium Length Single End End Mill, 1-1/2 in Dia Cutter, 0.04 in Corner Radius, 4 in Length of Cut, 6 Flutes, 1-1/4 in Dia Shank, 6-1/2 in OAL

NIAG N68967

Niagara Cutter N68968 VFP635 Center Cutting High Performance Long Length Single End End Mill, 1-1/2 in Dia Cutter, 0.04 in Corner Radius, 6 in Length of Cut, 6 Flutes, 1-1/4 in Dia Shank, 8-1/2 in OAL

NIAG N68968

Niagara Cutter N69291 REM710 Long Length Non-Center Cutting Single End End Mill, 1/4 in Dia Cutter, 0.02 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/16 in OAL

NIAG N69291

Niagara Cutter N69293 REM710 Long Length Non-Center Cutting Single End End Mill, 5/16 in Dia Cutter, 0.025 in Corner Radius, 1-3/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/8 in OAL

NIAG N69293

Niagara Cutter N69294 REM710 Long Length Non-Center Cutting Single End End Mill, 3/8 in Dia Cutter, 0.025 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL

NIAG N69294

Niagara Cutter N69295 REM710 Non-Center Cutting Short Length Single End End Mill, 7/16 in Dia Cutter, 0.025 in Corner Radius, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-11/16 in OAL

NIAG N69295

Niagara Cutter N69296 REM710 Long Length Non-Center Cutting Single End End Mill, 1/2 in Dia Cutter, 0.025 in Corner Radius, 2 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4 in OAL

NIAG N69296

Niagara Cutter N69297 REM710 Non-Center Cutting Short Length Single End End Mill, 9/16 in Dia Cutter, 0.025 in Corner Radius, 1-3/8 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-3/8 in OAL

NIAG N69297

Niagara Cutter N69299 REM710 Extended Reach Non-Center Cutting Single End End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 3 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 5-1/4 in OAL

NIAG N69299

Niagara Cutter N69301 REM710 Non-Center Cutting Short Length Single End End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1-5/8 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-3/4 in OAL

NIAG N69301

Niagara Cutter N69302 REM710 Medium Length Non-Center Cutting Single End End Mill, 7/8 in Dia Cutter, 0.03 in Corner Radius, 1-7/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4-1/8 in OAL

NIAG N69302

Niagara Cutter N69304 REM710 Non-Center Cutting Short Length Single End End Mill, 7/8 in Dia Cutter, 0.03 in Corner Radius, 1-7/8 in Length of Cut, 5 Flutes, 7/8 in Dia Shank, 4-1/8 in OAL

NIAG N69304

Niagara Cutter N69306 REM710 Long Length Non-Center Cutting Single End End Mill, 1 in Dia Cutter, 0.03 in Corner Radius, 3 in Length of Cut, 5 Flutes, 1 in Dia Shank, 5-1/2 in OAL

NIAG N69306

Niagara Cutter N69307 REM710 Extended Reach Non-Center Cutting Single End End Mill, 1 in Dia Cutter, 0.03 in Corner Radius, 4 in Length of Cut, 5 Flutes, 1 in Dia Shank, 6-1/2 in OAL

NIAG N69307

Niagara Cutter N69310 REM710 Non-Center Cutting Single End Stub Length End Mill, 1 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 3 in OAL

NIAG N69310

Niagara Cutter N69316 REM710 Medium Length Non-Center Cutting Single End End Mill, 1-1/4 in Dia Cutter, 0.04 in Corner Radius, 1-1/2 in Length of Cut, 6 Flutes, 3/4 in Dia Shank, 3-3/4 in OAL

NIAG N69316

Niagara Cutter N70015 REC700 Center Cutting Medium Length Single End End Mill, 1/4 in Dia Cutter, 0.02 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-7/16 in OAL

NIAG N70015

Niagara Cutter N70019 REC700 Center Cutting Short Length Single End End Mill, 5/16 in Dia Cutter, 0.025 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

NIAG N70019

Niagara Cutter N70023 REC700 Center Cutting Short Length Single End End Mill, 3/8 in Dia Cutter, 0.025 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

NIAG N70023

Niagara Cutter N70039 REC700 Center Cutting Long Length Single End End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 1-5/8 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-3/4 in OAL

NIAG N70039

Niagara Cutter N70047 REC700 Center Cutting Long Length Single End End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3-7/8 in OAL

NIAG N70047

Niagara Cutter N70129 REC700 Center Cutting Short Length Single End End Mill, 1/2 in Dia Cutter, 0.025 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

NIAG N70129

Niagara Cutter N70216 REC700 Center Cutting Single End Stub Length End Mill, 1/2 in Dia Cutter, 0.025 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 2-5/8 in OAL

NIAG N70216