SGS 36392 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1 in Dia Cutter, 0.09 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 36392 Z1CR

SGS 36393 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1 in Dia Cutter, 1/8 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 36393 Z1CR

SGS 36404 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 1/8 in, 3/8 in Length of Cut, 4 Flutes, 1/8 in Shank, 1-1/2 in OAL

SGS 36404 Z1

SGS 36406 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 5/32 in, 7/16 in Length of Cut, 4 Flutes, 3/16 in Shank, 2 in OAL

SGS 36406

SGS 36408 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 3/16 in, 7/16 in Length of Cut, 4 Flutes, 3/16 in Shank, 2 in OAL

SGS 36408 Z1

SGS 36410 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 7/32 in, 7/16 in Length of Cut, 4 Flutes, 1/4 in Shank, 2-1/2 in OAL

SGS 36410

SGS 36416 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 1/4 in, 1/2 in Length of Cut, 4 Flutes, 1/4 in Shank, 2-1/2 in OAL

SGS 36416 Z1S

SGS 36418 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 9/32 in, 5/8 in Length of Cut, 4 Flutes, 5/16 in Shank, 2-1/2 in OAL

SGS 36418 Z1S

SGS 36420 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 5/16 in, 13/16 in Length of Cut, 4 Flutes, 5/16 in Shank, 2-1/2 in OAL

SGS 36420 Z1S

SGS 36422 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 11/32 in, 13/16 in Length of Cut, 4 Flutes, 3/8 in Shank, 2-1/2 in OAL

SGS 36422 Z1S

SGS 36424 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 3/8 in, 7/8 in Length of Cut, 4 Flutes, 3/8 in Shank, 2-1/2 in OAL

SGS 36424 Z1S

SGS 36426 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 13/32 in, 15/16 in Length of Cut, 4 Flutes, 7/16 in Shank, 2-3/4 in OAL

SGS 36426 Z1S

SGS 36428 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 7/16 in, 1 in Length of Cut, 4 Flutes, 7/16 in Shank, 2-3/4 in OAL

SGS 36428 Z1S

SGS 36430 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 15/32 in, 1 in Length of Cut, 4 Flutes, 1/2 in Shank, 3 in OAL

SGS 36430 Z1S

SGS 36432 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 1/2 in, 1 in Length of Cut, 4 Flutes, 1/2 in Shank, 3 in OAL

SGS 36432 Z1S

SGS 36436 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 9/16 in, 1-1/8 in Length of Cut, 4 Flutes, 9/16 in Shank, 3-1/2 in OAL

SGS 36436 Z1S

SGS 36440 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 5/8 in, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Shank, 3-1/2 in OAL

SGS 36440 Z1S

SGS 36442 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 3/4 in, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Shank, 4 in OAL

SGS 36442 Z1S

SGS 36444 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 1 in, 1-1/2 in Length of Cut, 4 Flutes, 1 in Shank, 4 in OAL

SGS 36444

SGS 36450 Z-Carb-AP Z1PLC Center Cutting High Performance Long Reach Neck Single End Variable Rake End Mill, 1/4 in Dia Cutter, 0.02 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 4 in OAL

SGS 36450

SGS 36452 Z-Carb-AP Z1PLC Center Cutting High Performance Long Reach Neck Single End Variable Rake End Mill, 5/16 in Dia Cutter, 0.02 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 4 in OAL

SGS 36452

SGS 36456 Z-Carb-AP Z1PLC Center Cutting High Performance Long Reach Neck Single End Variable Rake End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 5 in OAL

SGS 36456

SGS 36460 Z-Carb-AP Z1PLC Center Cutting High Performance Long Reach Neck Single End Variable Rake End Mill, 7/16 in Dia Cutter, 0.02 in Corner Radius, 1 in Length of Cut, 4 Flutes, 7/16 in Dia Shank, 6 in OAL

SGS 36460 Z1CL

SGS 36462 Z-Carb-AP Z1PLC Center Cutting High Performance Long Reach Neck Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 6 in OAL

SGS 36462 Z1LC

SGS 36466 Z-Carb-AP Z1PLC Center Cutting High Performance Long Reach Neck Single End Variable Rake End Mill, 9/16 in Dia Cutter, 0.03 in Corner Radius, 1-1/8 in Length of Cut, 4 Flutes, 9/16 in Dia Shank, 6 in OAL

SGS 36466 Z1LC

SGS 36470 Z-Carb-AP Z1PLC Center Cutting High Performance Long Reach Neck Single End Variable Rake End Mill, 5/8 in Dia Cutter, 0.04 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 6 in OAL

SGS 36470 Z1LC

SGS 36472 Z-Carb-AP Z1PLC Center Cutting High Performance Long Reach Neck Single End Variable Rake End Mill, 3/4 in Dia Cutter, 0.04 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 6 in OAL

SGS 36472

SGS 36474 Z-Carb-AP Z1PLC Center Cutting High Performance Long Reach Neck Single End Variable Rake End Mill, 1 in Dia Cutter, 0.04 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 6 in OAL

SGS 36474 Z1CL

SGS 36480 Z-Carb-AP Z1PLB ZPB Ball Nose End Fractional High Performance End Mill, 1/4 in, 1/2 in Length of Cut, 4 Flutes, 1/4 in Shank, 4 in OAL

SGS 36480

SGS 36482 Z-Carb-AP Z1PLB ZPB Ball Nose End Fractional High Performance End Mill, 5/16 in, 13/16 in Length of Cut, 4 Flutes, 5/16 in Shank, 4 in OAL

SGS 36482

SGS 36486 Z-Carb-AP Z1PLB ZPB Ball Nose End Fractional High Performance End Mill, 3/8 in, 7/8 in Length of Cut, 4 Flutes, 3/8 in Shank, 5 in OAL

SGS 36486

SGS 36500 Z-Carb-AP Z1PLB ZPB Ball Nose End Fractional High Performance End Mill, 5/8 in, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Shank, 6 in OAL

SGS 36500 Z1LB

SGS 36502 ZPB Ball Nose End Fractional High Performance High Performance End Mill, 3/4 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 6 in OAL

SGS 36502

SGS 36504 Z-Carb-AP Z1PLB ZPB Ball Nose End Fractional High Performance End Mill, 1 in, 1-1/2 in Length of Cut, 4 Flutes, 1 in Shank, 6 in OAL

SGS 36504 Z1LB

SGS 36505 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 1/8 in Dia Cutter, 0.015 in Corner Radius, 1/4 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 36505

SGS 36506 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 5/32 in Dia Cutter, 0.015 in Corner Radius, 5/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 36506 Z16CR

SGS 36507 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 3/16 in Dia Cutter, 0.015 in Corner Radius, 3/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 36507 Z16CR

SGS 36508 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 7/32 in Dia Cutter, 0.02 in Corner Radius, 3/8 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2 in OAL

SGS 36508 Z16CR

SGS 36509 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 1/4 in Dia Cutter, 0.02 in Corner Radius, 7/16 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2 in OAL

SGS 36509 Z16C

SGS 36511 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 5/16 in Dia Cutter, 0.02 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2 in OAL

SGS 36511 Z16CR

SGS 36513 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2 in OAL

SGS 36513 Z16CR

SGS 36515 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 7/16 in Dia Cutter, 0.02 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 7/16 in Dia Shank, 2-1/2 in OAL

SGS 36515 Z16CR

SGS 36517 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL

SGS 36517 Z16CR

SGS 36519 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 5/8 in Dia Cutter, 0.04 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3 in OAL

SGS 36519 Z16CR

SGS 36520 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 3/4 in Dia Cutter, 0.04 in Corner Radius, 1 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3 in OAL

SGS 36520

SGS 36530 Z-Carb Z1 Medium Length Non-Center Cutting Single End Square End High Performance End Mill, 3/8 in Dia Cutter, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 36530

SGS 36531 Z-Carb Z1 Medium Length Non-Center Cutting Single End Square End High Performance End Mill, 13/32 in Dia Cutter, 15/16 in Length of Cut, 4 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL

SGS 36531 Z1

SGS 36532 Z-Carb Z1 Medium Length Non-Center Cutting Single End Square End High Performance End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL

SGS 36532

SGS 36533 Z-Carb Z1 Medium Length Non-Center Cutting Single End Square End High Performance End Mill, 15/32 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 36533 Z1

SGS 36534 Z-Carb Z1 Medium Length Non-Center Cutting Single End Square End High Performance End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 36534 Z1