SGS 36792 Z-Carb-MD ZD1CR Center Cutting High Performance Long Reach Neck Negative Rake Single End Mill, 3/4 in Dia Cutter, 0.06 in Corner Radius, 15/16 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4-1/2 in OAL

SGS 36792 ZDL1CR

SGS 36793 Z-Carb-MD ZD1CR Center Cutting High Performance Long Reach Neck Negative Rake Single End Mill, 3/4 in Dia Cutter, 0.06 in Corner Radius, 15/16 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 5-1/2 in OAL

SGS 36793 ZDE1CR

SGS 36804 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill With JetStream Coolant Slots, 1/2 in Dia Cutter, 0.01 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 36804

SGS 36805 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill With JetStream Coolant Slots, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 36805 Z1CR

SGS 36806 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill With JetStream Coolant Slots, 9/16 in Dia Cutter, 0.03 in Corner Radius, 1-1/8 in Length of Cut, 4 Flutes, 9/16 in Dia Shank, 3-1/2 in OAL

SGS 36806 Z1CR

SGS 36807 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill With JetStream Coolant Slots, 5/8 in Dia Cutter, 0.04 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 36807 Z1CR

SGS 36808 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill With JetStream Coolant Slots, 3/4 in Dia Cutter, 0.04 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 36808 Z1PCR

SGS 36809 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill With JetStream Coolant Slots, 1 in Dia Cutter, 0.04 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 36809 Z1CR

SGS 36826 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 1/2 in, 1 in Length of Cut, 4 Flutes, 1/2 in Shank, 3 in OAL

SGS 36826 Z1

SGS 36827 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 9/16 in, 1-1/8 in Length of Cut, 4 Flutes, 9/16 in Shank, 3-1/2 in OAL

SGS 36827 Z1

SGS 36828 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 5/8 in, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Shank, 3-1/2 in OAL

SGS 36828 Z1

SGS 36829 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 3/4 in, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Shank, 4 in OAL

SGS 36829 Z1

SGS 36830 Z-Carb Z1 Z1S Fractional High Performance Square End End Mill, 1 in, 1-1/2 in Length of Cut, 4 Flutes, 1 in Shank, 4 in OAL

SGS 36830 Z1

SGS 36846 Z-Carb Z1B Ball Nose End Fractional High Performance End Mill, 1/2 in, 1 in Length of Cut, 4 Flutes, 1/2 in Shank, 3 in OAL

SGS 36846 Z1B

SGS 36847 Z-Carb Z1B Ball Nose End Fractional High Performance End Mill, 9/16 in, 1-1/8 in Length of Cut, 4 Flutes, 9/16 in Shank, 3-1/2 in OAL

SGS 36847 Z1B

SGS 36848 Z1B Ball Nose End Fractional High Performance High Performance End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 36848 Z1B

SGS 36849 Z-Carb Z1B Ball Nose End Fractional High Performance End Mill, 3/4 in, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Shank, 4 in OAL

SGS 36849 Z1B

SGS 36850 Z-Carb Z1B Ball Nose End Fractional High Performance End Mill, 1 in, 1-1/2 in Length of Cut, 4 Flutes, 1 in Shank, 4 in OAL

SGS 36850 Z1B

SGS 36851 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/8 in Dia Cutter, 0.015 in Corner Radius, 3/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 36851

SGS 36852 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/16 in Dia Cutter, 0.015 in Corner Radius, 7/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 36852

SGS 36853 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/4 in Dia Cutter, 0.02 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 36853

SGS 36854 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/4 in Dia Cutter, 0.02 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 36854 Z1PCR

SGS 36855 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 5/16 in Dia Cutter, 0.02 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 36855 Z1PCR

SGS 36856 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 36856

SGS 36857 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 7/16 in Dia Cutter, 0.02 in Corner Radius, 1 in Length of Cut, 4 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL

SGS 36857

SGS 36858 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 36858

SGS 36859 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36859

SGS 36861 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 5/8 in Dia Cutter, 0.04 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 36861

SGS 36862 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/4 in Dia Cutter, 0.04 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 36862

SGS 36864 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 36864

SGS 36865 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 7/16 in Dia Cutter, 0.02 in Corner Radius, 1 in Length of Cut, 4 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL

SGS 36865

SGS 36866 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 36866

SGS 36867 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36867

SGS 36868 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 9/16 in Dia Cutter, 0.03 in Corner Radius, 1-1/8 in Length of Cut, 4 Flutes, 9/16 in Dia Shank, 3-1/2 in OAL

SGS 36868

SGS 36869 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 5/8 in Dia Cutter, 0.04 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 36869

SGS 36870 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/4 in Dia Cutter, 0.04 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 36870

SGS 36871 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1 in Dia Cutter, 0.04 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 36871

SGS 36872 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/16 in Dia Cutter, 0.005 in Corner Radius, 3/16 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 36872 ZAPC

SGS 36873 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/32 in Dia Cutter, 0.01 in Corner Radius, 9/32 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 36873 ZAPC

SGS 37041 Z-Carb-HPR Z5CR High Performance Non-Center Cutting Positive Rake Single End Mill With Through Coolant, 1/2 in Dia Cutter, 0.12 in Corner Radius, 1 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 37041 .145CR

SGS 37072 Z-Carb-HPR Z5CR High Performance Non-Center Cutting Positive Rake Single End End Mill With Through Coolant, 5/8 in Dia Cutter, 0.12 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 37072

SGS 37086 Z-Carb-HPR Z5CR High Performance Non-Center Cutting Positive Rake Single End End Mill With Through Coolant, 5/8 in Dia Cutter, 0.12 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 37086

SGS 37091 Z-Carb-HPR Z5CR High Performance Non-Center Cutting Positive Rake Single End Mill With Through Coolant, 3/4 in Dia Cutter, 0.09 in Corner Radius, 7/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 37091

SGS 37196 Z-Carb-HPR Z5CR High Performance Non-Center Cutting Positive Rake Single End End Mill With Through Coolant, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 37196

SGS 37283 Z-Carb-HPR Z5CR High Performance Non-Center Cutting Positive Rake Single End Mill With Through Coolant, 3/4 in Dia Cutter, 0.06 in Corner Radius, 1-1/2 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 37283

SGS 38001 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/8 in Dia Cutter, 0.015 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 38001 01C

SGS 38002 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/8 in Dia Cutter, 0.015 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 38002 01C

SGS 38003 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/8 in Dia Cutter, 0.02 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 38003 01C

SGS 38004 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/8 in Dia Cutter, 0.02 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 38004 01C

SGS 38009 1CR Center Cutting Positive Rake Regular Length Single End Mill, 3/16 in Dia Cutter, 0.015 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 38009 01C