SGS 32575 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 32575 55CR

SGS 32576 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 32576 55CR

SGS 32577 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 32577 55CR

SGS 32578 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 32578 55CR

SGS 32579 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 32579 55CR

SGS 32580 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 32580 55CR

SGS 32581 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 32581 55CR

SGS 32582 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 32582 55CR

SGS 32583 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 32583 55CR

SGS 32584 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 32584

SGS 32585 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/4 in Dia Cutter, 0.06 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 32585 55CR

SGS 32586 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 3/4 in Dia Cutter, 0.06 in Corner Radius, 1-5/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 32586 55CR

SGS 32587 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1 in Dia Cutter, 0.03 in Corner Radius, 1-1/2 in Length of Cut, 5 Flutes, 1 in Dia Shank, 4 in OAL

SGS 32587 55CR

SGS 32588 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1 in Dia Cutter, 0.03 in Corner Radius, 1-1/2 in Length of Cut, 5 Flutes, 1 in Dia Shank, 4 in OAL

SGS 32588 55CR

SGS 32589 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1 in Dia Cutter, 0.06 in Corner Radius, 1-1/2 in Length of Cut, 5 Flutes, 1 in Dia Shank, 4 in OAL

SGS 32589 55CR