SGS 36506 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 5/32 in Dia Cutter, 0.015 in Corner Radius, 5/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 36506 Z16CR

SGS 36507 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 3/16 in Dia Cutter, 0.015 in Corner Radius, 3/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 36507 Z16CR

SGS 36508 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 7/32 in Dia Cutter, 0.02 in Corner Radius, 3/8 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2 in OAL

SGS 36508 Z16CR

SGS 36509 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 1/4 in Dia Cutter, 0.02 in Corner Radius, 7/16 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2 in OAL

SGS 36509 Z16C

SGS 36511 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 5/16 in Dia Cutter, 0.02 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2 in OAL

SGS 36511 Z16CR

SGS 36513 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2 in OAL

SGS 36513 Z16CR

SGS 36515 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 7/16 in Dia Cutter, 0.02 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 7/16 in Dia Shank, 2-1/2 in OAL

SGS 36515 Z16CR

SGS 36517 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL

SGS 36517 Z16CR

SGS 36519 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 5/8 in Dia Cutter, 0.04 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3 in OAL

SGS 36519 Z16CR

SGS 36520 Z-Carb Z16CR Center Cutting High Performance Positive Rake Single End Stub Length End Mill, 3/4 in Dia Cutter, 0.04 in Corner Radius, 1 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3 in OAL

SGS 36520

SGS 36530 Z-Carb Z1 Medium Length Non-Center Cutting Single End Square End High Performance End Mill, 3/8 in Dia Cutter, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 36530

SGS 36531 Z-Carb Z1 Medium Length Non-Center Cutting Single End Square End High Performance End Mill, 13/32 in Dia Cutter, 15/16 in Length of Cut, 4 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL

SGS 36531 Z1

SGS 36532 Z-Carb Z1 Medium Length Non-Center Cutting Single End Square End High Performance End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL

SGS 36532

SGS 36533 Z-Carb Z1 Medium Length Non-Center Cutting Single End Square End High Performance End Mill, 15/32 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 36533 Z1

SGS 36534 Z-Carb Z1 Medium Length Non-Center Cutting Single End Square End High Performance End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 36534 Z1