SGS 38156 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1 in Dia Cutter, 1/8 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 38156 01C

SGS 38157 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/8 in Dia Cutter, 0.015 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 38157 01C

SGS 38158 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/8 in Dia Cutter, 0.02 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 38158 01C

SGS 38159 1CR Center Cutting Positive Rake Regular Length Single End Mill, 3/16 in Dia Cutter, 0.015 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 38159 01C

SGS 38160 1CR Center Cutting Positive Rake Regular Length Single End Mill, 3/16 in Dia Cutter, 0.02 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 38160 01C

SGS 38161 1CR Center Cutting Positive Rake Regular Length Single End Mill, 3/16 in Dia Cutter, 0.03 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 38161 01C

SGS 38162 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.015 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38162 01C

SGS 38163 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.02 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38163 01C

SGS 38164 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38164 01C

SGS 38165 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.045 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38165 01C

SGS 38166 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.015 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38166 01C

SGS 38167 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.02 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38167 01C

SGS 38168 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.03 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38168 01C

SGS 38169 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.045 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38169 01C

SGS 38170 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38170 01C