SGS 38226 3CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.045 in Corner Radius, 3/4 in Length of Cut, 2 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38226 03C

SGS 38231 3CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.015 in Corner Radius, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38231 03C

SGS 38232 3CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.015 in Corner Radius, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38232 03C

SGS 38233 3CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.02 in Corner Radius, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38233 03C

SGS 38234 3CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.02 in Corner Radius, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38234 03C

SGS 38235 3CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.03 in Corner Radius, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38235 03C

SGS 38236 3CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.03 in Corner Radius, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38236 03C

SGS 38237 3CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.045 in Corner Radius, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38237 03C

SGS 38238 3CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.045 in Corner Radius, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38238 03C

SGS 38245 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38245 03C

SGS 38246 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38246 03C

SGS 38247 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38247 03C

SGS 38248 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38248 03C

SGS 38249 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38249 03C

SGS 38250 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38250 03C