SGS 32594 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 5/8 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL

SGS 32594 55CS

SGS 32595 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 5/8 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL

SGS 32595 55CS

SGS 32596 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 5/8 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL

SGS 32596 55CS

SGS 32597 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 5/8 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL

SGS 32597 55CS

SGS 32598 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3 in OAL

SGS 32598 55CS

SGS 32599 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3 in OAL

SGS 32599 55CS

SGS 32600 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3 in OAL

SGS 32600 55CS

SGS 32601 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3 in OAL

SGS 32601 55CS

SGS 32602 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 3 in OAL

SGS 32602 55CS

SGS 32603 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 3 in OAL

SGS 32603 55CS

SGS 32604 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/4 in Dia Cutter, 0.06 in Corner Radius, 1 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 3 in OAL

SGS 32604 55CS

SGS 32605 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 3/4 in Dia Cutter, 0.06 in Corner Radius, 1 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 3 in OAL

SGS 32605 55CS

SGS 32606 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/8 in Dia Cutter, 0.01 in Corner Radius, 1/4 in Length of Cut, 5 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 32606 55CR

SGS 32607 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/8 in Dia Cutter, 0.01 in Corner Radius, 1/2 in Length of Cut, 5 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 32607 SER55CR

SGS 32608 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/32 in Dia Cutter, 0.01 in Corner Radius, 5/16 in Length of Cut, 5 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 32608 55CS