SGS 36869 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 5/8 in Dia Cutter, 0.04 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 36869

SGS 36870 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/4 in Dia Cutter, 0.04 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 36870

SGS 36871 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1 in Dia Cutter, 0.04 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 36871

SGS 36872 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/16 in Dia Cutter, 0.005 in Corner Radius, 3/16 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 36872 ZAPC

SGS 36873 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/32 in Dia Cutter, 0.01 in Corner Radius, 9/32 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 36873 ZAPC

SGS 37041 Z-Carb-HPR Z5CR High Performance Non-Center Cutting Positive Rake Single End Mill With Through Coolant, 1/2 in Dia Cutter, 0.12 in Corner Radius, 1 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 37041 .145CR

SGS 37072 Z-Carb-HPR Z5CR High Performance Non-Center Cutting Positive Rake Single End End Mill With Through Coolant, 5/8 in Dia Cutter, 0.12 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 37072

SGS 37086 Z-Carb-HPR Z5CR High Performance Non-Center Cutting Positive Rake Single End End Mill With Through Coolant, 5/8 in Dia Cutter, 0.12 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 37086

SGS 37091 Z-Carb-HPR Z5CR High Performance Non-Center Cutting Positive Rake Single End Mill With Through Coolant, 3/4 in Dia Cutter, 0.09 in Corner Radius, 7/8 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 37091

ENDMILL 5FL SQ TA Z-CARB HPR 1/2

SGS 37190

SGS 37196 Z-Carb-HPR Z5CR High Performance Non-Center Cutting Positive Rake Single End End Mill With Through Coolant, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 37196

SGS 37283 Z-Carb-HPR Z5CR High Performance Non-Center Cutting Positive Rake Single End Mill With Through Coolant, 3/4 in Dia Cutter, 0.06 in Corner Radius, 1-1/2 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 37283

SGS 38001 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/8 in Dia Cutter, 0.015 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 38001 01C

SGS 38002 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/8 in Dia Cutter, 0.015 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 38002 01C

SGS 38003 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/8 in Dia Cutter, 0.02 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 38003 01C