Prototyp Protostar HSC 30 5150519 H4044918 Center Cutting End Mill, 1 mm Dia Cutter, 1 mm Length of Cut, 2 Flutes, 3 mm Dia Shank, 60 mm OAL

PRTO 5150519

Prototyp Protostar HSC 30 5150522 H4044918 Center Cutting End Mill, 1.5 mm Dia Cutter, 1.5 mm Length of Cut, 2 Flutes, 3 mm Dia Shank, 60 mm OAL

PRTO 5150522

Prototyp Protostar HSC 30 5150665 H4046919 Ball Nose Center Cutting Long Reach End Mill, 0.4 mm Dia Cutter, 0.4 mm Length of Cut, 2 Flutes, 3 mm Dia Shank, 38 mm OAL

PRTO 5150665

Prototyp Protostar HSC 30 5150669 H4046919 Ball Nose Center Cutting Long Reach End Mill, 0.5 mm Dia Cutter, 0.5 mm Length of Cut, 2 Flutes, 3 mm Dia Shank, 38 mm OAL

PRTO 5150669

Prototyp Protostar HSC 30 5150677 H4046919 Ball Nose Center Cutting Long Reach End Mill, 0.8 mm Dia Cutter, 0.8 mm Length of Cut, 2 Flutes, 3 mm Dia Shank, 38 mm OAL

PRTO 5150677

Prototyp Protostar HSC 30 5150685 H4046919 Ball Nose Center Cutting Long Reach End Mill, 1.5 mm Dia Cutter, 1.5 mm Length of Cut, 2 Flutes, 3 mm Dia Shank, 60 mm OAL

PRTO 5150685

Prototyp Protostar HSC 30 Ultra 5150766 H8004028 End Mill, 6 mm Dia Cutter, 6 mm Length of Cut, 2 Flutes, 8 mm Dia Shank, 63 mm OAL

PRTO 5150766

Prototyp Protostar HSC 30 Ultra 5150862 H8015728 Center Cutting End Mill, 16 mm Dia Cutter, 16 mm Length of Cut, 4 Flutes, 16 mm Dia Shank, 92 mm OAL

PRTO 5150862

Prototyp Protostar HSC 30 Ultra 5150891 H8015828 Center Cutting End Mill, 12 mm Dia Cutter, 12 mm Length of Cut, 4 Flutes, 12 mm Dia Shank, 100 mm OAL

PRTO 5150891

Prototyp Protostar H 50 Ultra 5150931 H8082228 Non-Center Cutting End Mill, 16 mm Dia Cutter, 32 mm Length of Cut, 6 Flutes, 16 mm Dia Shank, 92 mm OAL

PRTO 5150931

Prototyp Protostar Ti 40 5337890 H7073717 Non-Center Cutting End Mill With Internal Coolant Channel, 12 mm Dia Cutter, 19 mm Length of Cut, 4 Flutes, 12 mm Dia Shank, 83 mm OAL

PRTO 5337890

Prototyp Protostar H 50 Tough Guys 5530500 H3070318 Center Cutting End Mill, 10 mm Dia Cutter, 22 mm Length of Cut, 4 Flutes, 10 mm Dia Shank, 72 mm OAL

PRTO 5530500

Prototyp Protostar H 50 Tough Guys 5530503 H3070318 Center Cutting End Mill, 12 mm Dia Cutter, 26 mm Length of Cut, 4 Flutes, 12 mm Dia Shank, 83 mm OAL

PRTO 5530503

Prototyp Protostar H 50 Tough Guys 5530550 H3070118 Center Cutting End Mill, 20 mm Dia Cutter, 38 mm Length of Cut, 4 Flutes, 20 mm Dia Shank, 125 mm OAL

PRTO 5530550

Prototyp Protostar Qmax HR Kordel F40 5543068 AH3182378 Center Cutting Standard End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/2 in OAL

PRTO 5543068

Prototyp Protostar Qmax HR Kordel F40 5543220 AH3182378 Center Cutting Standard End Mill, 3/4 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

PRTO 5543220

Prototyp Protostar Flash 5543246 AH3094718 Non-Center Cutting End Mill, 1/8 in Dia Cutter, 1/2 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

PRTO 5543246

Prototyp Protostar Flash 5543247 AH3094718 Non-Center Cutting End Mill, 3/16 in Dia Cutter, 5/8 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

PRTO 5543247

Prototyp Protostar Flash 5543248 AH3094718 Non-Center Cutting End Mill, 1/4 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

PRTO 5543248

Prototyp Protostar Flash 5543249 AH3094718 Non-Center Cutting End Mill, 5/16 in Dia Cutter, 0.813 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3 in OAL

PRTO 5543249

Prototyp Protostar Flash 5543250 AH3094718 Non-Center Cutting End Mill, 3/8 in Dia Cutter, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3 in OAL

PRTO 5543250

Prototyp Protostar Flash 5543252 AH3094718 Non-Center Cutting End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/2 in OAL

PRTO 5543252

Prototyp Protostar Flash 5543253 AH3094718 Non-Center Cutting End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

PRTO 5543253

Prototyp Protostar N 30 5543372 AH3022118 Center Cutting End Mill, 1/16 in Dia Cutter, 4.76 mm Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2 in OAL

PRTO 5543372

Prototyp Protostar N 45 5543413 AH3023418 Center Cutting End Mill, 1/4 in Dia Cutter, 28.6 mm Length of Cut, 4 Flutes, 1/4 in Dia Shank, 3 in OAL

PRTO 5543413

Prototyp Protostar N 45 5543415 AH3023418 Center Cutting End Mill, 3/8 in Dia Cutter, 28.6 mm Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3 in OAL

PRTO 5543415

Prototyp Protostar N 45 5543416 AH3023418 Center Cutting End Mill, 1/2 in Dia Cutter, 50.8 mm Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/2 in OAL

PRTO 5543416

Prototyp Protostar N 45 5543417 AH3023418 Center Cutting End Mill, 5/8 in Dia Cutter, 57.2 mm Length of Cut, 5 Flutes, 5/8 in Dia Shank, 5 in OAL

PRTO 5543417

Prototyp Protostar N 45 5543418 AH3023418 Center Cutting End Mill, 3/4 in Dia Cutter, 57.2 mm Length of Cut, 5 Flutes, 3/4 in Dia Shank, 5 in OAL

PRTO 5543418

Prototyp Protostar N 45 5543421 AH3023518 Center Cutting End Mill, 3/8 in Dia Cutter, 44.4 mm Length of Cut, 4 Flutes, 3/8 in Dia Shank, 4 in OAL

PRTO 5543421

Prototyp Protostar N 45 5543422 AH3023518 Center Cutting End Mill, 1/2 in Dia Cutter, 76.2 mm Length of Cut, 4 Flutes, 1/2 in Dia Shank, 6 in OAL

PRTO 5543422

Prototyp Protostar N 45 5543423 AH3023518 Center Cutting End Mill, 5/8 in Dia Cutter, 76.2 mm Length of Cut, 5 Flutes, 5/8 in Dia Shank, 6 in OAL

PRTO 5543423

Prototyp Protostar N 45 5543424 AH3023518 Center Cutting End Mill, 3/4 in Dia Cutter, 76.2 mm Length of Cut, 5 Flutes, 3/4 in Dia Shank, 6 in OAL

PRTO 5543424

Prototyp Protostar N 50 5543425 AH3021138 Non-Center Cutting End Mill, 1/8 in Dia Cutter, 12.7 mm Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

PRTO 5543425

Prototyp Protostar N 50 5543426 AH3021138 Non-Center Cutting End Mill, 3/16 in Dia Cutter, 15.9 mm Length of Cut, 5 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

PRTO 5543426

Prototyp Protostar N 50 5543429 AH3021138 Non-Center Cutting End Mill, 3/8 in Dia Cutter, 22.2 mm Length of Cut, 6 Flutes, 3/8 in Dia Shank, 3 in OAL

PRTO 5543429

Prototyp Protostar N 50 5543431 AH3021138 Non-Center Cutting End Mill, 1/2 in Dia Cutter, 25.4 mm Length of Cut, 6 Flutes, 1/2 in Dia Shank, 3-1/2 in OAL

PRTO 5543431

Prototyp Protostar N 50 5543433 AH3021138 Non-Center Cutting End Mill, 3/4 in Dia Cutter, 38.1 mm Length of Cut, 8 Flutes, 3/4 in Dia Shank, 4 in OAL

PRTO 5543433

Prototyp Protostar AL 45 5543452 AH602511 Center Cutting End Mill, 3/4 in Dia Cutter, 38.1 mm Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

PRTO 5543452

Prototyp Protostar AL 45 5543458 AH602551 Center Cutting Long Reach End Mill, 1/2 in Dia Cutter, 50.8 mm Length of Cut, 2 Flutes, 1/2 in Dia Shank, 4-1/2 in OAL

PRTO 5543458

Prototyp Protostar HSC 30 5543741 AH4046918 Ball Nose End Mill, 1/32 in Dia Cutter, 1/32 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 2-1/2 in OAL

PRTO 5543741

Prototyp Protostar HSC 30 5543745 AH4046918 Ball Nose End Mill, 1/16 in Dia Cutter, 1/16 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 2-1/2 in OAL

PRTO 5543745

Prototyp Protostar HSC 30 Ultra 5543780 AH8004128 Ball Nose Center Cutting Long Reach Standard End Mill, 1/8 in Dia Cutter, 1/8 in Length of Cut, 2 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

PRTO 5543780

Prototyp Protostar HSC 30 Ultra 5543802 AH8016428 Ball Nose Center Cutting Long Reach End Mill, 1/4 in Dia Cutter, 0.28 in Length of Cut, 2 Flutes, 1/4 in Dia Shank, 4 in OAL

PRTO 5543802

Prototyp Protostar HSC 30 Ultra 5543804 AH8016428 Ball Nose Center Cutting Long Reach End Mill, 3/8 in Dia Cutter, 0.415 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 4 in OAL

PRTO 5543804

Prototyp Protostar HSC 30 Ultra 5543805 AH8016428 Ball Nose Center Cutting Long Reach End Mill, 1/2 in Dia Cutter, 0.509 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 6 in OAL

PRTO 5543805

END MILL 5/8 X 60 DEG 4FL

RICH 875-E-DM60-0625

SGS 02211 M2S Fractional Micro Square End End Mill, 0.015 in, 0.023 in Length of Cut, 2 Flutes, 1/8 in Shank, 1-1/2 in OAL

SGS 02211

SGS 02217 M2S Fractional Micro Square End End Mill, 0.021 in, 0.032 in Length of Cut, 2 Flutes, 1/8 in Shank, 1-1/2 in OAL

SGS 02217

SGS 02484 M4 M4S Fractional Micro Square End End Mill, 0.055 in, 0.165 in Length of Cut, 4 Flutes, 1/8 in Shank, 1-1/2 in OAL

SGS 02484