SGS 36598 Z-Carb Z1 Medium Length Non-Center Cutting Single End Square End High Performance End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36598 Z1

SGS 36599 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/4 in Dia Cutter, 0.01 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 36599 Z1CR

SGS 36600 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/4 in Dia Cutter, 0.015 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 36600 Z1CR

SGS 36601 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/4 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 36601 Z1CR

SGS 36602 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.01 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36602 Z1CR

SGS 36603 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.01 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36603 Z1CR

SGS 36604 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.015 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36604 Z1CR

SGS 36605 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.015 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36605

SGS 36610 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36610 Z1CR

SGS 36611 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36611 Z1CR

SGS 36612 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.09 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36612 Z1CR

SGS 36613 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.09 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36613 Z1CR

SGS 36614 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 1/8 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36614 Z1CR

SGS 36615 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 1/8 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36615 ZAE1C

SGS 36616 Z-Carb-HTA ZH1CR Center Cutting High Performance Regular Length Positive Rake Single End Mill, 1/4 in Dia Cutter, 0.02 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 36616 ZHE1CR

SGS 36617 Z-Carb-HTA ZH1CR Center Cutting High Performance Regular Length Positive Rake Single End End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36617 ZHE1CR

SGS 36618 Z-Carb-HTA ZH1CR Center Cutting High Performance Regular Length Positive Rake Single End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL

SGS 36618 ZHE1CR

SGS 36622 Multi-Carb 66 High Performance Positive Rake Regular Length Square End End Mill, 3/8 in Dia Cutter, 1 in Length of Cut, 7 Flutes, 3/8 in Dia Shank, 3 in OAL

SGS 36622

SGS 36623 Multi-Carb 66 High Performance Positive Rake Regular Length Square End End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 9 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 36623

SGS 36625 Multi-Carb 66 High Performance Positive Rake Regular Length Square End End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 11 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 36625 66

END MILL CARBIDE 3/4 11FL W/FLATS

SGS 36625 CEM430

SGS 36626 Multi-Carb 66 High Performance Positive Rake Regular Length Square End End Mill, 1 in Dia Cutter, 2 in Length of Cut, 11 Flutes, 1 in Dia Shank, 6 in OAL

SGS 36626

SGS 36629 66CR Corner Radius Fractional High Performance Long Length Multi-Flute End Mill, 3/8 in, 1 in Length of Cut, 7 Flutes, 3/8 in Shank, 3 in OAL

SGS 36629

SGS 36631 66CR Corner Radius Fractional High Performance Long Length Multi-Flute End Mill, 1/2 in, 1-1/4 in Length of Cut, 9 Flutes, 1/2 in Shank, 3 in OAL

SGS 36631

SGS 36636 66C Corner Radius Fractional High Performance Long Length Multi-Flute High Performance End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 11 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 36636

SGS 36637 66C Corner Radius Fractional High Performance Long Length Multi-Flute High Performance End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 11 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 36637

SGS 36640 66CR Corner Radius High Performance Fractional Long Length End Mill, 1 in, 2 in Length of Cut, 11 Flutes, 1 in Shank, 6 in OAL

SGS 36640

SGS 36701 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/8 in Dia Cutter, 0.01 in Corner Radius, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 36701 Z1CR

SGS 36702 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 36702 Z1CR

SGS 36704 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.01 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 36704 Z1CR

SGS 36706 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 36706

SGS 36707 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.09 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 36707 Z1CR

SGS 36709 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 36709 Z1CR

SGS 36710 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 36710 Z1CR

SGS 36711 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 5/8 in Dia Cutter, 0.09 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 36711 Z1CR

SGS 36714 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/4 in Dia Cutter, 0.09 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 36714

SGS 36715 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/4 in Dia Cutter, 1/8 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 36715

SGS 36716 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1 in Dia Cutter, 0.03 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 36716 Z1CR

SGS 36717 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1 in Dia Cutter, 0.06 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 36717 Z1CR

SGS 36718 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1 in Dia Cutter, 0.09 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 36718 Z1CR

SGS 36719 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1 in Dia Cutter, 1/8 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 36719 Z1CR

SGS 36722 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/16 in Dia Cutter, 0.03 in Corner Radius, 7/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 36722 Z1CR

SGS 36723 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/4 in Dia Cutter, 0.015 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 36723 Z1CR

SGS 36724 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 5/16 in Dia Cutter, 0.015 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 36724 Z1CR

SGS 36725 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 36725 Z1CR

SGS 36727 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/8 in Dia Cutter, 0.06 in Corner Radius, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 36727 Z1CR

SGS 36729 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 36729 Z1CR

SGS 36731 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 1/2 in Dia Cutter, 1/8 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 36731 Z1CR

SGS 36733 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 5/8 in Dia Cutter, 1/8 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 36733 Z1CR

SGS 36736 Z-Carb-AP Z1PCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 36736 Z1CR