SGS 38119 1CR Center Cutting Positive Rake Regular Length Single End Mill, 3/16 in Dia Cutter, 0.03 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 38119 01C

SGS 38120 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.015 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38120 01C

SGS 38121 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.02 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38121 01C

SGS 38122 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38122 01C

SGS 38123 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.045 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38123 01C

SGS 38124 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.015 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38124 01C

SGS 38125 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.02 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38125 01C

SGS 38126 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.03 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38126 01C

SGS 38127 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.045 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38127 01C

SGS 38128 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38128 01C

SGS 38129 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38129 01C

SGS 38130 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38130 01C

SGS 38131 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.045 in Corner Radius, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38131 01C

SGS 38132 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38132 01C

SGS 38133 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.02 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38133 01C

SGS 38134 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38134 01C

SGS 38135 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.045 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38135 01C

SGS 38136 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38136 01C

SGS 38137 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.015 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38137 01C

SGS 38138 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.02 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38138 01C

SGS 38139 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38139 01C

SGS 38140 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.045 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38140 01C

SGS 38141 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38141 01C

SGS 38142 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.09 in Corner Radius, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38142 01C

SGS 38143 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.015 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38143 01C

SGS 38144 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.02 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38144 01C

SGS 38145 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38145 01C

SGS 38146 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.045 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38146 01C

SGS 38147 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.06 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38147 01C

SGS 38148 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.09 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38148 01C

SGS 38149 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 1/8 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38149 01C

SGS 38150 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1 in Dia Cutter, 0.015 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 38150 01C

SGS 38151 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1 in Dia Cutter, 0.02 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 38151 01C

SGS 38152 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1 in Dia Cutter, 0.03 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 38152 01C

SGS 38153 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1 in Dia Cutter, 0.045 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 38153 01C

SGS 38154 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1 in Dia Cutter, 0.06 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 38154 01C

SGS 38155 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1 in Dia Cutter, 0.09 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 38155 01C

SGS 38156 1CR Center Cutting Positive Rake Regular Length Single End End Mill, 1 in Dia Cutter, 1/8 in Corner Radius, 1-1/2 in Length of Cut, 4 Flutes, 1 in Dia Shank, 4 in OAL

SGS 38156 01C

SGS 38157 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/8 in Dia Cutter, 0.015 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 38157 01C

SGS 38158 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/8 in Dia Cutter, 0.02 in Corner Radius, 1/2 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

SGS 38158 01C

SGS 38159 1CR Center Cutting Positive Rake Regular Length Single End Mill, 3/16 in Dia Cutter, 0.015 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 38159 01C

SGS 38160 1CR Center Cutting Positive Rake Regular Length Single End Mill, 3/16 in Dia Cutter, 0.02 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 38160 01C

SGS 38161 1CR Center Cutting Positive Rake Regular Length Single End Mill, 3/16 in Dia Cutter, 0.03 in Corner Radius, 5/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL

SGS 38161 01C

SGS 38162 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.015 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38162 01C

SGS 38163 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.02 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38163 01C

SGS 38164 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38164 01C

SGS 38165 1CR Center Cutting Positive Rake Regular Length Single End Mill, 1/4 in Dia Cutter, 0.045 in Corner Radius, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL

SGS 38165 01C

SGS 38166 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.015 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38166 01C

SGS 38167 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.02 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38167 01C

SGS 38168 1CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.03 in Corner Radius, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38168 01C