SGS 38233 3CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.02 in Corner Radius, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38233 03C

SGS 38234 3CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.02 in Corner Radius, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38234 03C

SGS 38235 3CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.03 in Corner Radius, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38235 03C

SGS 38236 3CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.03 in Corner Radius, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38236 03C

SGS 38237 3CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.045 in Corner Radius, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38237 03C

SGS 38238 3CR Center Cutting Positive Rake Regular Length Single End Mill, 5/16 in Dia Cutter, 0.045 in Corner Radius, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL

SGS 38238 03C

SGS 38245 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38245 03C

SGS 38246 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38246 03C

SGS 38247 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38247 03C

SGS 38248 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.02 in Corner Radius, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38248 03C

SGS 38249 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38249 03C

SGS 38250 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38250 03C

SGS 38251 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.045 in Corner Radius, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38251 03C

SGS 38252 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/8 in Dia Cutter, 0.045 in Corner Radius, 1 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL

SGS 38252 03C

SGS 38259 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38259 03C

SGS 38260 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.015 in Corner Radius, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38260 03C

SGS 38261 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.02 in Corner Radius, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38261 03C

SGS 38262 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.02 in Corner Radius, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38262 03C

SGS 38263 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38263 03C

SGS 38264 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38264 03C

SGS 38265 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.045 in Corner Radius, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38265 03C

SGS 38266 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.045 in Corner Radius, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38266 03C

SGS 38267 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38267 03C

SGS 38268 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL

SGS 38268 03C

SGS 38273 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.015 in Corner Radius, 1-1/4 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38273 03C

SGS 38274 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.015 in Corner Radius, 1-1/4 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38274 03C

SGS 38275 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.02 in Corner Radius, 1-1/4 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38275 03C

SGS 38276 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.02 in Corner Radius, 1-1/4 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38276 03C

SGS 38277 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38277 03C

SGS 38278 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 1-1/4 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38278 03C

SGS 38279 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.045 in Corner Radius, 1-1/4 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38279 03C

SGS 38280 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.045 in Corner Radius, 1-1/4 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38280 03C

SGS 38281 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38281 03C

SGS 38282 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 1-1/4 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38282 03C

SGS 38283 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.09 in Corner Radius, 1-1/4 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38283 03C

SGS 38284 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 5/8 in Dia Cutter, 0.09 in Corner Radius, 1-1/4 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL

SGS 38284 03C

SGS 38287 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.015 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38287 03C

SGS 38288 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.015 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38288 03C

SGS 38289 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.02 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38289 03C

SGS 38290 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.02 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38290 03C

SGS 38291 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38291 03C

SGS 38292 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38292 03C

SGS 38293 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.045 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38293 03C

SGS 38294 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.045 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38294 03C

SGS 38295 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.06 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38295 03C

SGS 38296 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.06 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38296 03C

SGS 38297 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.09 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38297 03C

SGS 38298 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 0.09 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38298 03C

SGS 38299 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 1/8 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38299 03C

SGS 38300 3CR Center Cutting Positive Rake Regular Length Single End End Mill, 3/4 in Dia Cutter, 1/8 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL

SGS 38300 03C