Scotch-Weld™ 021200-49080 2-Part Low Odor Adhesive, 20 L Cartridge, Paste Form, Part A: White/Part B: Green, 1.07

322-328 N 9th St.
Terre Haute, IN 47807
812-234-1569
www.ind-supply.com

Scotch-Weld™ 021200-49080 2-Part Low Odor Adhesive, 20 L Cartridge, Paste Form, Part A: White/Part B: Green, 1.07

Item Code: 3M 051144-33639
Brand: Scotch-Weld
Mfg Part No: 021200-49080
Manufacturer: 3M
Unit Size: 1

Description

3M™ Scotch-Weld™ low odor acrylic adhesive DP810 is a toughened 2-part, room temperature curing acrylic adhesive specially formulated to bond oily metals, plastics and other surfaces. With lower odor and non-flammable properties, 3M™ Scotch-Weld™ acrylic adhesive DP810 contributes to a safer work environment compared to typical acrylic adhesives. When using a duo-pak (DP) size adhesive, rely on 3M™ dispensing equipment for convenient and accurate metering, mixing and dispensing. This unique acrylic gives you the strong shear and peel strength along with good impact resistance for durability to meet demanding end use applications. Making work safer, faster and more efficient, that's just a few of the benefits of 3M™ Scotch-Weld™ low odor acrylic adhesive DP810. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The acrylic adhesive cures to a tan or black color. With a mix ratio is 1:1, 3M™ Scotch-Weld™ low odor acrylic adhesive DP810 provides a 10 min work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 min and is fully cured in 8 to 24 hr (at 72 deg F/22 deg C). 3M™ Scotch-Weld™ low odor acrylic adhesive DP810 is approved under UL 746C, polymeric materials use in electrical equipment. Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are 2-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2-part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

Features Tech Specs Applications

Features

Low odor adhesive is ideal for any setting where harsh fumes or flammability are an issue
Provides high shear and peel strength and is toughened for impact resistance
10 min work life and 20 min handling strength
Bonds oily metals with minimal surface preparation

Tech Specs

Base Type	Acrylic
Color	Part A: White/Part B: Green
Composition	Part A: Phenoxyethyl Methacrylate, 2-Hydroxypropyl Methacrylate, 2-Hydroxyethyl Methacrylate, Acrylate Oligomer, Acrylonitrile-Butadiene Polymer, Cumene Hydroperoxide/Part B: Phenoxyethyl Methacrylate, 2-Hydroxypropyl Methacrylate, 2-Hydroxyethyl Methacry, Acrylonitrile-Butadiene Polymer, Acrylate Oligomer
Container Size	20
Container Type	Cartridge
Curing Time	8 to 24
Flash Point	Part A: >/=217 deg F/Part B: >200 deg F
Form	Paste
Mixing Ratio	1:1
Odor/Scent	Part A: Low/Part B: Slight Fragrance
Setting Time	10
Specific Gravity	1.07
Temperature Rating	<40
Type	2-Part Low Odor
UPC	05114433639
VOC Content	Part A: 319 g/L/Part B: 349 g/L