SGS V-Carb 55CR Corner Radius Medium Length Single End High Performance End Mill, 4 in OAL, 5 Flutes, 1 in Cutter
- Item Code: SGS 32590 CEM376
- Brand: SGS
- Mfg Part No: 32590
- Manufacturer: SGS Tool
- Unit Size: 1
Description
The V-Carb end mill is the finishing touch that you can expect more from. The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components. However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. Tackle a range of applications with this tool.
Features
Back To Top- Variable pitch combined with an odd number of flutes suppresses chatter and produces better surface finishes
- Rigid construction minimizes deflection and increases part accuracy
- Optimized tool geometry allows for improved shearing and decreased loads
- Can be run at higher production rates
- Tool holders with adequate gripping pressure are required
- Stub length solid holders are recommended for heavy stock removal
- Avoid remilling chips
- Set-up rigidity critical during heavy roughing
- Regrind and recondition services are available from SGS tool company
- External coolant
- Positive rake angle
- Unequal flute spacing
- Solid carbide provides better rigidity than high speed steel
- It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials
- Applicable materials: steels, stainless steels, cast iron, high temp alloys and titanium
- =0/-0.002 in D1, H6 D2 tolerances
- 0.06 in corner radius
Tech Specs
Back To TopCutter Diameter | 1 in |
---|---|
Cutting Direction | Right Hand |
Finish | AlTiN Coated |
Flute Type | Spiral |
Helix Angle | 45 deg |
Material | Micrograin Solid Carbide |
Maximum Depth of Cut | 1-1/2 in |
Number of Flutes | 5 |
Overall Length | 4 in |
Series | V-Carb™ 55CR |
Shank Diameter | 1 in |
Shank Type | Straight/Weldon Flat |
Type | Corner Radius Medium Length Single End |
Applications
Back To TopRelated Items
SGS 31153 5B 05B Ball Nose End Fractional End Mill, 3/8 in, 1 in Length of Cut, 3 Flutes, 3/8 in Shank, 2-1/2 in OAL
LEARN MORESGS 31154 5B 05B Ball Nose End Fractional End Mill, 25/64 in, 1 in Length of Cut, 3 Flutes, 7/16 in Shank, 2-3/4 in OAL
LEARN MORESGS 31155 5B 05B Ball Nose End Fractional End Mill, 13/32 in, 1 in Length of Cut, 3 Flutes, 7/16 in Shank, 2-3/4 in OAL
LEARN MORESGS 31156 05B Ball Nose End Fractional End Mill, 27/64 in Dia Cutter, 1 in Length of Cut, 3 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL
LEARN MORESGS 31157 5B 05B Ball Nose End Fractional End Mill, 7/16 in, 1 in Length of Cut, 3 Flutes, 7/16 in Shank, 2-3/4 in OAL
LEARN MORESGS 31158 5B 05B Ball Nose End Fractional End Mill, 29/64 in, 1 in Length of Cut, 3 Flutes, 1/2 in Shank, 3 in OAL
LEARN MORESGS 31159 5B 05B Ball Nose End Fractional End Mill, 15/32 in, 1 in Length of Cut, 3 Flutes, 1/2 in Shank, 3 in OAL
LEARN MORESGS 31160 05B Ball Nose End Fractional End Mill, 31/64 in Dia Cutter, 1 in Length of Cut, 3 Flutes, 1/2 in Dia Shank, 3 in OAL
LEARN MORESGS 31161 5B 05B Ball Nose End Fractional End Mill, 1/2 in, 1 in Length of Cut, 3 Flutes, 1/2 in Shank, 3 in OAL
LEARN MORESGS 31162 5B 05B Ball Nose End Fractional End Mill, 9/16 in, 1-1/8 in Length of Cut, 3 Flutes, 9/16 in Shank, 3-1/2 in OAL
LEARN MORESGS 31163 5B 05B Ball Nose End Fractional End Mill, 5/8 in, 1-1/4 in Length of Cut, 3 Flutes, 5/8 in Shank, 3-1/2 in OAL
LEARN MORESGS 31164 5B 05B Ball Nose End Fractional End Mill, 11/16 in, 1-3/8 in Length of Cut, 3 Flutes, 3/4 in Shank, 4 in OAL
LEARN MORESGS 31165 5B 05B Ball Nose End Fractional End Mill, 3/4 in, 1-1/2 in Length of Cut, 3 Flutes, 3/4 in Shank, 4 in OAL
LEARN MORESGS 31166 5B 05B Ball Nose End Fractional End Mill, 7/8 in, 1-1/2 in Length of Cut, 3 Flutes, 7/8 in Shank, 4 in OAL
LEARN MORESGS 31168 5B 05B Ball Nose End Fractional End Mill, 1/8 in, 3/8 in Length of Cut, 3 Flutes, 1/8 in Shank, 1-1/2 in OAL
LEARN MORESGS 31170 14 Series 14S Double End Fractional Stub Length Square End End Mill, 1/32 in, 1/16 in Length of Cut, 4 Flutes, 1/8 in Shank, 1-1/2 in OAL
LEARN MORESGS 31171 14 Series 14S Double End Fractional Stub Length Square End End Mill, 3/64 in, 3/32 in Length of Cut, 4 Flutes, 1/8 in Shank, 1-1/2 in OAL
LEARN MORE