Simpson Strong-Tie Crack-Pac ETIPAC10KT Injection Epoxy Kit, 9 oz, Blue, >250 deg F Flash

Item Code: SIST ETIPAC10KT
Brand: Simpson Strong-Tie
Mfg Part No: ETIPAC10KT
Manufacturer: Simpson Strong-Tie
Unit Size: 1

Description

The Crack-Pac® injection epoxy is designed to repair cracks in concrete ranging from 1/64\" to 1/4\" wide in concrete walls, floors, slabs, columns and beams. The mixed adhesive has the viscosity of a light oil and a low surface tension, allowing it to penetrate fine to medium-width cracks in dry, damp or wet conditions with excellent results. Resin is contained in the cartridge and hardener is contained in the nozzle.

Features Tech Specs Applications

Features

Dispenses with a standard caulking tool, no special dispensing tool needed
Clean and easy to mix
Seals out moisture, protecting rebar in the concrete from corrosion and flooring from moisture damage
Chemically bonds with the concrete to restore strength
Non-shrink material resistant to oils, salts and mild chemicals
Can be used to inject cracks in dry, damp or wet conditions with excellent results
Not for use in actively leaking cracks
In order for components to mix properly, the resin and hardener must be conditioned to 60 - 80 deg F before mixing
The color of epoxy will change from amber to blue during the cure process and then fade back to light amber within a few weeks of installation
The kit includes everything needed to pressure inject approximately 8 lineal feet of cracks (assumes a concrete of 4 in THK and 1/16 in W crack)
2010 psi bond strength at 2 days and 3830 psi bond strength at 14 days
5860 psi tensile strength
14% tensile elongation at break
11300 psi compressive yield strength
319000 psi compressive modulus
8020 psi flexural strength
0.08% water absorption
0.002 linear coefficient of shrinkage
16 min gel time
30 min full, mixed cartridge

Tech Specs

Bonds To	Concrete
Color	Blue
Composition	Bisphenol A-Epichlorohydrin, Benzene-1,3-Dimethaneamine, Diethylenetriamine
Container Size	9
Curing Time	24
Flash Point	>250
pH Range	12
Series	ETIPAC10
VOC Content	7

Applications

For use to inject cracks in dry and damp or wet conditions with excellent results