Simpson Strong-Tie WA50414MG Wedge-All Wedge Anchor, 1/2 in Dia, 4-1/4 in OAL, 2-13/16 in L Thread, Carbon Steel, Mechanically Galvanized

322-328 N 9th St.
Terre Haute, IN 47807
812-234-1569
www.ind-supply.com

Simpson Strong-Tie WA50414MG Wedge-All Wedge Anchor, 1/2 in Dia, 4-1/4 in OAL, 2-13/16 in L Thread, Carbon Steel, Mechanically Galvanized

Item Code: SIST WA50414MG
Brand: Simpson Strong-Tie
Mfg Part No: WA50414MG
Manufacturer: Simpson Strong-Tie
Unit Size: 1

Description

A non-bottom-bearing, wedge-style expansion anchor for use in solid concrete or grout-filled masonry. The Wedge-All® wedge anchor is available in carbon steel with zinc or mechanically galvanized coating, as well as Types 303/304 and Type 316 stainless steel. Threaded studs are set by tightening the nut to the specified torque. The Wedge-All is code listed for grout-filled masonry applications.

Features Tech Specs Applications

Features

Code listed under IBC/IRC for grout-filled CMU per ICC-ESESR-1396
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Available in a wide range of diameters and lengths
Carbon steel ASTM A563 grade A nut
The minimum concrete thickness is 1-1/2 times the embedment depth
The allowable loads are based on a safety factor of 4
9/16 in minimum fixture hole
60 ft-lb installation torque
3280 lb at 2000 psi/5280 lb at 4000 psi ultimate tension loads and 820 lb at 2000 psi, 1360 lb at 4000 allowable tension loads for concrete
6560 lb at 2000 psi ultimate and 1345 lb at 2000 psi, 1485 lb at 3000 psi, 1625 lb at 4000 psi allowable shear loads for concrete
Anchor body material meets minimum 70000 psi tensile strength

Tech Specs

Diameter	1/2
Drill Size	1/2
Finish	Mechanically Galvanized
Head Size	3/4
Material	Carbon Steel
Minimum Embedment Depth	2-1/4
Overall Length	4-1/4
Series	Wedge-All®
Shear Strength	850
Tensile Strength	871
Thread Length	2-13/16