M.A. Ford Twister GP 40504680 Double End Plain Edge Combined Drill and Countersink, 3/64 in Drill - Fraction, 0.0469 in Drill - Decimal Inch, 60 deg Included Angle, Solid Carbide, Bright

FORD 40509 40504680

M.A. Ford Twister GP 40507810 Double End Plain Edge Combined Drill and Countersink, 5/64 in Drill - Fraction, 0.0781 in Drill - Decimal Inch, 60 deg Included Angle, Solid Carbide, Bright

FORD 40513 40507810

M.A. Ford Twister GP 40510930 Double End Plain Edge Combined Drill and Countersink, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 60 deg Included Angle, Solid Carbide, Bright

FORD 40517 40510930

SGS 57005 301 Double End General Purpose Combined Drill and Countersink, #00 Drill - Wire, 0.025 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57005 301

SGS 57006 301 Double End General Purpose Combined Drill and Countersink, #0 Drill - Wire, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57006 301

SGS 57007 301 Double End General Purpose Combined Drill and Countersink, #1 Drill - Wire, 0.228 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57007 301

SGS 57008 301 Double End General Purpose Combined Drill and Countersink, #2 Drill - Wire, 0.221 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57008 301

SGS 57009 301 Double End General Purpose Combined Drill and Countersink, #3 Drill - Wire, 0.213 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57009 301

SGS 57010 301 Double End General Purpose Combined Drill and Countersink, #4 Drill - Wire, 0.209 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57010 301

SGS 67017 301M Double End General Purpose Combined Drill and Countersink, 2.5 mm Drill - Metric, 0.0984 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 67017 301

SGS 67019 301M Double End General Purpose Combined Drill and Countersink, 3.1 mm Drill - Metric, 0.122 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 67019 301

SGS 67021 301M Double End General Purpose Combined Drill and Countersink, 4 mm Drill - Metric, 0.1575 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 67021 301

SGS 67023 301M Double End General Purpose Combined Drill and Countersink, 5 mm Drill - Metric, 0.1969 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 67023 301

M.A. Ford Twister GP 40512500 Double End Plain Edge Combined Drill and Countersink, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 60 deg Included Angle, Solid Carbide, Bright

FORD 40521 40512500

M.A. Ford Twister GP 40518750 Double End Plain Edge Combined Drill and Countersink, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 60 deg Included Angle, Solid Carbide, Bright

FORD 40525 40518750

DRILL & CSINK COMB #1 X 5

KEO 21054

DRILL & CSINK HS #2 X 6

KEO 22060

SGS 57011 301 Double End General Purpose Combined Drill and Countersink, #5 Drill - Wire, 0.2055 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57011 301

SGS 57012 301 Double End General Purpose Combined Drill and Countersink, #6 Drill - Wire, 0.204 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 57012 301

SGS 67005 301M Double End General Purpose Combined Drill and Countersink, 0.5 mm Drill - Metric, 0.0197 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 67005 301

SGS 67007 301M Double End General Purpose Combined Drill and Countersink, 0.8 mm Drill - Metric, 0.0315 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 67007 301

SGS 67009 301M Double End General Purpose Combined Drill and Countersink, 1 mm Drill - Metric, 0.0394 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 67009 301

SGS 67011 301M Double End General Purpose Combined Drill and Countersink, 1.25 mm Drill - Metric, 0.0492 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 67011 301

SGS 67013 301M Double End General Purpose Combined Drill and Countersink, 1.6 mm Drill - Metric, 0.063 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 67013 301

SGS 67015 301M Double End General Purpose Combined Drill and Countersink, 2 mm Drill - Metric, 0.0787 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, Micrograin Solid Carbide, Bright

SGS 67015 301

Precision Twist Drill 003255 DC Series Center Drill Combined Drill and Countersink, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HM, Bright

PRTW 6002372 03255 DC

Precision Twist Drill 003253 General Purpose Short Length Combination Drill and Countersink, NO 2, 60 deg, 118 deg, HM

PRTW 6002278 03253 DC

Precision Twist Drill 003256 General Purpose Short Length Combination Drill and Countersink, NO 5, 60 deg, 118 deg, HM

PRTW 6002380 03256 DC

Precision Twist Drill 097601 76HA Center Drill Regular length Combined Drill and Countersink, 3/64 in Drill - Fraction, 0.0469 in Drill - Decimal Inch, 60 deg Included Angle, HSS, Bright

PRTW 6001213 97601 76HA

Precision Twist Drill 097602 76HA Center Drill Regular length Combined Drill and Countersink, 5/64 in Drill - Fraction, 0.0781 in Drill - Decimal Inch, 60 deg Included Angle, HSS, Bright

PRTW 6001215 97602 76HA

Precision Twist Drill 097603 76HA Center Drill Regular length Combined Drill and Countersink, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 60 deg Included Angle, HSS, Bright

PRTW 6001217 97603 76HA

Precision Twist Drill 097604 76HA Center Drill Regular length Combined Drill and Countersink, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 60 deg Included Angle, HSS, Bright

PRTW 6001219 97604 76HA

Precision Twist Drill 097605 76HA Center Drill Regular length Combined Drill and Countersink, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 60 deg Included Angle, HSS, Bright

PRTW 6001221 97605 76HA

Dormer 0030707 A200 Center Drill Double End Combined Drill and Countersink, 1 mm Drill - Metric, 0.0394 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969827 0030707 0243

Dormer 0030714 A200 Center Drill Double End Combined Drill and Countersink, 1.25 mm Drill - Metric, 0.0492 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969831 0030714 0243

Dormer 0030721 A200 Center Drill Double End Combined Drill and Countersink, 1.6 mm Drill - Metric, 0.063 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969836 0030721 0243

Dormer 0030738 A200 Center Drill Double End Combined Drill and Countersink, 10 mm Drill - Metric, 0.3937 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969841 0030738 0243

Dormer 0030745 A200 Center Drill Double End Combined Drill and Countersink, 2 mm Drill - Metric, 0.0787 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969854 0030745 0243

Dormer 0030752 A200 Center Drill Double End Combined Drill and Countersink, 2.5 mm Drill - Metric, 0.0984 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969858 0030752 0243

Precision Twist Drill 003257 General Purpose Short Length Combination Drill and Countersink, NO 6, 60 deg, 118 deg, HM

PRTW 6002384 03257 DC

Precision Twist Drill 003251 DC Series Center Drill Combined Drill and Countersink, 1/32 in Drill - Fraction, 0.0312 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HM, Bright

PRTW 6002219 03251 DC

Precision Twist Drill 003252 DC Series Center Drill Combined Drill and Countersink, 3/64 in Drill - Fraction, 0.0469 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HM, Bright

PRTW 6002246 03252 DC

Precision Twist Drill 003254 DC Series Center Drill Combined Drill and Countersink, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HM, Bright

PRTW 6002325 03254 DC

Precision Twist Drill 097606 76HA Center Drill Regular length Combined Drill and Countersink, 7/32 in Drill - Fraction, 0.2188 in Drill - Decimal Inch, 60 deg Included Angle, HSS, Bright

PRTW 6001223 97606 76HA

Precision Twist Drill 097607 76HA Center Drill Regular length Combined Drill and Countersink, 1/4 in Drill - Fraction, 0.25 in Drill - Decimal Inch, 60 deg Included Angle, HSS, Bright

PRTW 6001225 97607 76HA

Precision Twist Drill 097608 76HA Center Drill Regular length Combined Drill and Countersink, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 60 deg Included Angle, HSS, Bright

PRTW 6001227 97608 76HA

Precision Twist Drill 097610 76HA Center Drill Regular length Combined Drill and Countersink, 1/32 in Drill - Fraction, 0.0312 in Drill - Decimal Inch, 60 deg Included Angle, HSS, Bright

PRTW 6001205 97610 76HA

Precision Twist Drill 097620 76HA Center Drill Regular length Combined Drill and Countersink, 0.025 in Drill - Decimal Inch, 60 deg Included Angle, HSS, Bright

PRTW 6001208 97620 76HA

Precision Twist Drill 097630 76HA Center Drill Regular length Combined Drill and Countersink, 0.02 in Drill - Decimal Inch, 60 deg Included Angle, HSS, Bright

PRTW 6001210 97630 76HA

Dormer 0030691 A200 Center Drill Single End Combined Drill and Countersink, 0.8 mm Drill - Metric, 0.0315 in Drill - Decimal Inch, 60 deg Included Angle, 118 deg Point Angle, HSS, Bright

DORM 5969822 0030691 0243