SGS 68692 108M Plus General Purpose Short Length Drill, Imperial/Metric, 4.4 mm Drill - Metric, 0.1732 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68692 108M

SGS 68693 108M Plus General Purpose Short Length Drill, Imperial/Metric, 4.5 mm Drill - Metric, 0.1772 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68693 108M

SGS 68694 108M Plus General Purpose Short Length Drill, Imperial/Metric, 4.6 mm Drill - Metric, 0.1811 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68694 108M

SGS 68695 108M Plus General Purpose Short Length Drill, Imperial/Metric, 4.7 mm Drill - Metric, 0.185 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68695 108M

SGS 68696 108M Plus General Purpose Short Length Drill, Imperial/Metric, 4.8 mm Drill - Metric, 0.189 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68696 108M

SGS 68697 108M Plus General Purpose Short Length Drill, Imperial/Metric, 4.9 mm Drill - Metric, 0.1929 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68697 108M

SGS 68698 108M Plus General Purpose Short Length Drill, Imperial/Metric, 5 mm Drill - Metric, 0.1969 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68698 108M

SGS 68699 108M Plus General Purpose Short Length Drill, Imperial/Metric, 5.1 mm Drill - Metric, 0.2008 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68699 108M

SGS 68700 108M Plus General Purpose Short Length Drill, Imperial/Metric, 5.2 mm Drill - Metric, 0.2047 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68700 108M

SGS 68701 108M Plus General Purpose Short Length Drill, Imperial/Metric, 5.3 mm Drill - Metric, 0.2087 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68701 108M

SGS 68712 108M Plus General Purpose Short Length Drill, Imperial/Metric, 6.4 mm Drill - Metric, 0.252 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68712 108M

SGS 68713 108M Plus General Purpose Short Length Drill, Imperial/Metric, 6.5 mm Drill - Metric, 0.2559 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68713 108M

SGS 68718 108M Plus General Purpose Short Length Drill, Imperial/Metric, 7 mm Drill - Metric, 0.2756 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68718 108M

SGS 68723 108M Plus General Purpose Short Length Drill, Imperial/Metric, 7.5 mm Drill - Metric, 0.2953 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68723 108M

SGS 68728 108M Plus General Purpose Short Length Drill, Imperial/Metric, 8 mm Drill - Metric, 0.315 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68728 108M

SGS 68733 108M Plus General Purpose Short Length Drill, Imperial/Metric, 8.5 mm Drill - Metric, 0.3346 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68733 108M

SGS 68738 108M Plus General Purpose Short Length Drill, Imperial/Metric, 9 mm Drill - Metric, 0.3543 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68738 108M

SGS 68743 108M Plus General Purpose Short Length Drill, Imperial/Metric, 9.5 mm Drill - Metric, 0.374 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68743 108M

SGS 68748 108M Plus General Purpose Short Length Drill, Imperial/Metric, 10 mm Drill - Metric, 0.3937 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68748 108M

SGS 68753 108M Plus General Purpose Short Length Drill, Imperial/Metric, 10.5 mm Drill - Metric, 0.4134 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68753 108M

Starrett A17-38E Extended Length General Purpose Locking Hole Saw Arbor, For Use With 1-1/2 to 8-9/32 in Dia Hole Saw, HSS

STAR A17-38E 11937

Starrett A1-E Extended Length General Purpose With Pilot Drill, 1/2-20 Arbor, 1/4 in Drill, 3/8 in Chuck, 11/32 in Hex Shank, For Use With 1-1/4 to 8-9/32 in Dia Hole Saws, HSS

STAR A1-E 11925

Starrett A2-E Extended Length General Purpose Quick-Hitch With Pilot Drill, 5/8-18 Arbor, 1/4 in Drill, 1/2 in Chuck, 7/16 in Hex Shank, For Use With 1-1/4 to 8-9/32 in Dia Hole Saws, HSS

STAR A2-E 11928

Starrett A4-E Extended Length General Purpose With Pilot Drill, 1/2-20 Arbor, 1/4 in Drill, 1/4 in Chuck, 1/4 in Round Shank, For Use With 9/16 to 1-3/16 in Dia Hole Saws, HSS

STAR A4-E 11931

Starrett CT158 High Performance Triple Chip Starrett Hole Saw, 1-5/8 in Dia, 1-5/8 in D Cutting, Tungsten Carbide Tipped Cutting Edge, 1/2-20 Arbor

STAR CT158 65621

Starrett CT178 High Performance Triple Chip Starrett Hole Saw, 1-7/8 in Dia, 1-5/8 in D Cutting, Tungsten Carbide Tipped Cutting Edge, 1/2-20 Arbor

STAR CT178 65623

Starrett CT334 High Performance Triple Chip Hole Saw, 3-3/4 in Dia, 1-5/8 in D Cutting, Tungsten Carbide Tipped Cutting Edge, 1/2-20 Arbor

STAR CT334 65636

Starrett CT338 High Performance Triple Chip Hole Saw, 3-3/8 in Dia, 1-5/8 in D Cutting, Tungsten Carbide Tipped Cutting Edge, 1/2-20 Arbor

STAR CT338 65633

Starrett CT358 High Performance Triple Chip Starrett Hole Saw, 3-5/8 in Dia, 1-5/8 in D Cutting, Tungsten Carbide Tipped Cutting Edge, 1/2-20 Arbor

STAR CT358 65635

Starrett CT412 High Performance Triple Chip Hole Saw, 4-1/2 in Dia, 1-5/8 in D Cutting, Tungsten Carbide Tipped Cutting Edge, 1/2-20 Arbor

STAR CT412 65641

Starrett CT414 High Performance Triple Chip Hole Saw, 4-1/4 in Dia, 1-5/8 in D Cutting, Tungsten Carbide Tipped Cutting Edge, 1/2-20 Arbor

STAR CT414 65639

SGS 68702 108M Plus General Purpose Short Length Drill, Imperial/Metric, 5.4 mm Drill - Metric, 0.2126 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68702 108M

SGS 68703 108M Plus General Purpose Short Length Drill, Imperial/Metric, 5.5 mm Drill - Metric, 0.2165 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68703 108M

SGS 68704 108M Plus General Purpose Short Length Drill, Imperial/Metric, 5.6 mm Drill - Metric, 0.2205 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68704 108M

SGS 68705 108M Plus General Purpose Short Length Drill, Imperial/Metric, 5.7 mm Drill - Metric, 0.2244 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68705 108M

SGS 68706 108M Plus General Purpose Short Length Drill, Imperial/Metric, 5.8 mm Drill - Metric, 0.2283 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68706 108M

SGS 68707 108M Plus General Purpose Short Length Drill, Imperial/Metric, 5.9 mm Drill - Metric, 0.2323 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68707 108M

SGS 68708 108M Plus General Purpose Short Length Drill, Imperial/Metric, 6 mm Drill - Metric, 0.2362 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68708 108M

SGS 68709 108M Plus General Purpose Short Length Drill, Imperial/Metric, 6.1 mm Drill - Metric, 0.2402 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68709 108M

SGS 68710 108M Plus General Purpose Short Length Drill, Imperial/Metric, 6.2 mm Drill - Metric, 0.2441 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68710 108M

SGS 68711 108M Plus General Purpose Short Length Drill, Imperial/Metric, 6.3 mm Drill - Metric, 0.248 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68711 108M

SGS 68758 108M Plus General Purpose Short Length Drill, Imperial/Metric, 11 mm Drill - Metric, 0.4331 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68758 108M

SGS 68763 108M Plus General Purpose Short Length Drill, Imperial/Metric, 11.5 mm Drill - Metric, 0.4528 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68763 108M

SGS 68768 108M Plus General Purpose Short Length Drill, Imperial/Metric, 12 mm Drill - Metric, 0.4724 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68768 108M

SGS 68773 108M Plus General Purpose Short Length Drill, Imperial/Metric, 12.5 mm Drill - Metric, 0.4921 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68773 108M

SGS 68778 108M Plus General Purpose Short Length Drill, Imperial/Metric, 13 mm Drill - Metric, 0.5118 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68778 108M

SGS 68780 108M Plus General Purpose Short Length Drill, Imperial/Metric, 14 mm Drill - Metric, 0.5512 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68780 108M

SGS 68948 103M General Purpose Regular Length Screw Machine Drill, Imperial/Metric, 10.7 mm Drill - Metric, 0.4212 in Drill - Decimal Inch, Micrograin Solid Carbide, TiCN Coated

SGS 68948 103M

SGS 68965 103M General Purpose Regular Length Screw Machine Drill, Imperial/Metric, 3 mm Drill - Metric, 0.1181 in Drill - Decimal Inch, Micrograin Solid Carbide, AlTiN Coated

SGS 68965 103M

Starrett A10-E Extended Length General Purpose Quick-Hitch With Pilot Drill, 5/8-18 Arbor, 1/4 in Drill, 3/8 in Chuck, 11/32 in Hex Shank, For Use With 1-1/4 to 8-9/32 in Dia Hole Saws, HSS

STAR A10-E 11934