SGS 32590 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1 in Dia Cutter, 0.06 in Corner Radius, 1-1/2 in Length of Cut, 5 Flutes, 1 in Dia Shank, 4 in OAL

SGS 32590 55CR

SGS V-Carb 55CR Corner Radius Medium Length Single End High Performance End Mill, 4 in OAL, 5 Flutes, 1 in Cutter

SGS 32590 CEM376

SGS 32591 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1/2 in Length of Cut, 5 Flutes, 3/8 in Dia Shank, 2 in OAL

SGS 32591 55CS

SGS 32592 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 1/2 in Length of Cut, 5 Flutes, 3/8 in Dia Shank, 2 in OAL

SGS 32592 55CS

SGS 32593 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 1/2 in Length of Cut, 5 Flutes, 3/8 in Dia Shank, 2 in OAL

SGS 32593 55CS

SGS 32594 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 5/8 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL

SGS 32594 55CS

SGS 32595 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1/2 in Dia Cutter, 0.03 in Corner Radius, 5/8 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL

SGS 32595 55CS

SGS 32596 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 5/8 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL

SGS 32596 55CS

SGS 32597 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1/2 in Dia Cutter, 0.06 in Corner Radius, 5/8 in Length of Cut, 5 Flutes, 1/2 in Dia Shank, 2-1/2 in OAL

SGS 32597 55CS

SGS 32598 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3 in OAL

SGS 32598 55CS

SGS 32599 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 5/8 in Dia Cutter, 0.03 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3 in OAL

SGS 32599 55CS

SGS 32600 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3 in OAL

SGS 32600 55CS

SGS 32601 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 5/8 in Dia Cutter, 0.06 in Corner Radius, 3/4 in Length of Cut, 5 Flutes, 5/8 in Dia Shank, 3 in OAL

SGS 32601 55CS

SGS 32602 V-Carb 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 3 in OAL

SGS 32602 55CS

SGS 32603 V-Carb 55CR Center Cutting High Performance Positive Rake Single End End Mill, 3/4 in Dia Cutter, 0.03 in Corner Radius, 1 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 3 in OAL

SGS 32603 55CS