• 322-328 N 9th St.
    Terre Haute, IN 47807
  • 812-234-1569
  • www.ind-supply.com

Simpson Strong-Tie Strong-Rod SET-XP10 SET-XP High Strength Epoxy Adhesive, 8.5 oz Cartridge, Liquid/Paste Form, Black/Green/White, 1.21/1.59

  • Item Code: SIST SET-XP10
  • Brand: Simpson Strong-Tie
  • Mfg Part No: SET-XP10
  • Manufacturer: Simpson Strong-Tie
  • Unit Size: 1

Description

SET-XP® epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle. When properly mixed, adhesive will be a uniform teal color for easy post-installation identification.

Features Tech Specs Applications

Features

Back To Top
    • 1:1 two-component, high-solids, epoxy-based anchoring adhesive formula
    • Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to elevated temperatures and long-term sustained loads
    • Code listed under the IBCor IRC for cracked and uncracked concrete per ICC-ES ESR-2508
    • Code listed under the IBC/IRC for masonry per IAPMO UES ER-265
    • Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
    • Easy hole cleaning no power-brushing required
    • Suitable for use in dry or water-saturated concrete
    • For best results, store between 45 to 90 deg F
    • Threaded rod anchoring and rebar doweling into concrete and masonry
    • Multiple dot listings
    • Surfaces to receive epoxy must be clean
    • Base material temperature must be 50 deg F or above at the time of installation, for best results, material should be between 70 to 80 deg F at time of application
    • To warm cold material, store cartridges in a warm, uniformly heated area or storage container
    • Do not immerse cartridges in water to facilitate warming
    • Mixed material in nozzle can harden in 30 min at temperatures of 70 deg F and above
    • Use only appropriate Simpson Strong-Tie® mixing nozzle in accordance with Simpson Strong-Tie® instructions
    • Modification or improper use of mixing nozzle may impair epoxy performance
    • The load tables list values based upon results from the most recent testing and may not reflect those in current code reports
    • Passed, non-sag consistency
    • 155 deg F glass transition temperature

Tech Specs

Back To Top
Base Type Epoxy
Color Black/Green/White
Composition (Resin White Side)-Bisphenol A-Epichlorohydrin, Phenol, Polymer With Formaldehyde, Glycidyl Ether, Butyl Glycidyl Ether, Titanium Dioxide, (Hardener Black Side)- Silica, Crystalline Quartz, Polyamido Amine, 2,4,6-Tris Dimethylaminomethyl) Phenol, Dimethyl Silicone Polymer With Silica, Phenol, Benzene-1,3-Dimethaneamine, 3,6,9-Triazaundecamethylenediamine
Container Size 8.5
Container Type Cartridge
Curing Time 24 hr at 70 deg F, 72 hr at 50 deg F
Flash Point 250/262
Form Liquid/Paste
Mixing Ratio 0.0423611111
Odor/Scent Ammonia/Sweet
pH Range 6.9/10.3
Series SET-XP®
Specific Gravity 1.21/1.59
Type High Strength
VOC Content 3

Applications

Back To Top
Water and Sewage Treatment

Related Items

SIST ET-HP22-N

SIST ET-HP22-N

Simpson Strong-Tie Strong-Rod ET-HP22-N ET-HP Epoxy Adhesive, 22 oz Side-By-Side Cartridge, Liquid/Paste Form, Black/White, 1.19/1.36

LEARN MORE